727458
9
Zoom out
Zoom in
Previous page
1/15
Next page
EN 9
fan heater TFC 18 E
Using the oscillation function
By means of the oscillation function you can achieve consistent
heating or ventilation.
1. Set the function selector switch(2) to either or .
ð The oscillation function is activated.
ð The device operates at heating level1 or 2.
ð The device turns to and fro by up to 70°.
2
2. Set the function selector switch(2) to positionI orII to
switch the oscillation function back off.
Note
Never attempt to manually adjust the pivoting
mechanism. The mechanism could be damaged. Only
change the air flow direction by use of the function
selector switch.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Set the rotary switch(1) of the room thermostat to the
lowest level.
Turn the function selector switch(2) to the position
(ventilation only).
Keep the fan running for 3minutes before switching the
device off.
Switch the device off by setting the function selector
switch(2) to the 0position.
Hold onto the mains plug while pulling the power cable out
of the mains socket.
Allow the device to cool down completely.
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
Errors and faults
Warning of electrical voltage
Tasks which require the housing to be opened
must only be carried out by authorised specialist
companies or by Trotec.
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
The device does not start:
Check the power connection.
Check the power cable and mains plug for damages.
Check the on-site fusing.
Check the room temperature. The room thermostat may
have switched off, because the desired room temperature
has been reached.
The motor might be defective. Have a defective motor
replaced by a specialist electrical company.
Check whether the device is standing upright and on level
ground. The tilt protection may have been tripped owing to
the fact that the device was knocked over. Always put up
the device in an upright position on a suitable, sufficiently
dimensioned surface.
The room thermostat might be defective. Have a defective
room thermostat replaced by a specialist electrical
company.
The overheating protection may have been tripped. Have a
specialist electrical company or Trotec check the electrics
and replace the overheating protection.
Wait for 10minutes before restarting the device. If the
device is not starting, have the electrics checked by a
specialist company or by Trotec.
The device is switched on, the fan is operating, the heating
is not:
Check whether a heating level is selected.
Check the room temperature. The room thermostat may
have switched off, because the desired room temperature
has been reached.
Check whether the overheating protection has tripped, see
chapter Safety.
The heating resistor might have blown. Have a defective
heating resistor replaced by a specialist electrical
company.
The room thermostat might be defective. Have a defective
room thermostat replaced by a specialist electrical
company.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TFC18E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TFC18E in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TFC18E

Trotec TFC18E User Manual - German - 16 pages

Trotec TFC18E User Manual - Dutch - 15 pages

Trotec TFC18E User Manual - Danish - 15 pages

Trotec TFC18E User Manual - French - 15 pages

Trotec TFC18E User Manual - Italian - 15 pages

Trotec TFC18E User Manual - Polish - 15 pages

Trotec TFC18E User Manual - Portuguese - 15 pages

Trotec TFC18E User Manual - Swedish - 15 pages

Trotec TFC18E User Manual - Turkish - 15 pages

Trotec TFC18E User Manual - Spanish - 15 pages

Trotec TFC18E User Manual - Norwegian - 15 pages

Trotec TFC18E User Manual - Finnish - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info