727799
8
Zoom out
Zoom in
Previous page
1/14
Next page
8 EN
designer glass convector TCH 2010 E / TCH 2011 E
No. Designation Meaning
15 Decrease value
button
For setting the desired room
temperature (15°C to 35°C) or the
number of hours and minutes for
the timer (1min to 24h)
16 Increase value button
17 MODEbutton For selecting the operating mode:
= Comfort heating mode
= Economy heating mode
= Frost monitor heating mode
18 Power button For switching the device on or
activating standby mode
19 Timer indication Flashes when the timer is
activated.
20 Hours / minutes
indication
Indication of the number of hours
and minutes during timer
programming
Indication of remaining timer run-
time
21 Temperature
indication
Indication of the current room
temperature during operation
Indication of the desired room
temperature during temperature
adjustment
Info
The display comes with a blue background
illumination. The background illumination switches on
as soon as one of the control panel buttons is pressed.
After approx.30s without any input, the background
illumination switches back off.
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Set the on/off switch(5) toI.
ð An acoustic signal is emitted.
ð The device is now in standby mode.
2. Press the power button(18).
ð The device starts in frost monitor heating mode.
ð The frost monitor heating mode indication(10) is
displayed with a flashing black frame.
Info
In standby mode, the device memorizes the room
temperature setting.
Setting the operating mode
Mode
The following types of heating can be selected:
Comfort heating mode (heating capacity 2000W)
Economy heating mode (heating capacity 1000W)
Frost monitor heating mode
1. Press the MODE button(17) until the desired heating mode
is selected.
ð The selected mode and the heating indication(11) will
be displayed edged in black.
Comfort heating mode
The device operates with a heating capacity of 2000W until
reaching the desired room temperature. Upon reaching the
desired room temperature the device reduces its heating
capacity to 1000W. The comfort heating modeindication(8)
continues to be displayed.
If the determined room temperature exceeds the desired room
temperature by 2°C, the heating switches off.
The heating indication(11) is no longer framed.
If the determined room temperature falls below the desired
room temperature by 2°C, the heating switches back to
comfort heating mode.
Economy heating mode
The device operates with a heating capacity of 1000W until the
determined room temperature reaches the desired room
temperature. Then the heating switches off.
The heating indication(11) is no longer framed.
If the determined room temperature falls below the desired
room temperature by 2°C, the heating switches back to
economy heating mode.
Frost monitor heating mode
In frost monitor heating mode the devices heats automatically if
the room temperature is below 5°C. This temperature cannot
be changed.
Setting the desired room temperature
The room temperature determined by the temperature
sensor(5) is displayed on the temperature indication(21). You
can set the desired room temperature at any time.
The room temperature is preset to 35°C.
1. Press the TEMP button(13).
ð The temperature indication(21) flashes.
ð The desired room temperature is displayed.
2. Press the arrow buttons increase value(16) or decrease
value(15) to adjust the desired room temperature. Setting
is possible in the range between 15°C and 35°C in
increments of 1°C.
ð The desired room temperature is saved and shown on
the temperature indication(21) for approx.5seconds.
Then the current room temperature is displayed again.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec TCH2010E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec TCH2010E in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec TCH2010E

Trotec TCH2010E User Manual - German - 14 pages

Trotec TCH2010E User Manual - Dutch - 14 pages

Trotec TCH2010E User Manual - French - 14 pages

Trotec TCH2010E User Manual - Italian - 14 pages

Trotec TCH2010E User Manual - Polish - 14 pages

Trotec TCH2010E User Manual - Turkish - 14 pages

Trotec TCH2010E User Manual - Spanish - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info