753924
8
Zoom out
Zoom in
Previous page
1/10
Next page
8 EN
LED work lamp PWLS 05-10 / PWLS 06-10
4. Disconnect the USB charging cable(13) from the device
that has been charged, and from the device PWLS06-10.
Note
The battery indication (4 blue LEDs) does not need to
be observed when charging an external device.
While charging, the battery indication (4 blue LEDs)
only displays the battery status of the device PWLS
06-10.
Note
Note that the device PWLS 06-10 discharges when it is
used as power bank.
Shutdown (PWLS05-10)
Warning of electrical voltage
Never touch the batteries in the battery
compartment(6) with wet or damp hands.
Switch the device off.
Remove the batteries from the battery compartment(6).
If required, allow the device to cool down.
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
Shutdown (PWLS06-10)
Note
Never touch the USB connections of the device
PWLS 06-10 with wet or damp hands.
1. Switch the device off.
2. Disconnect the USB charging cable(13).
3. If required, allow the device to cool down.
4. Clean the device according to the Maintenance chapter.
5. Store the device according to the Storage chapter.
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
Troubleshooting tasks which require the housing to be opened
must only be carried out by an authorized specialist electrical
company or by Trotec.
The battery does not charge:
Check if the USB charging cable is plugged in properly into
both the charger and the device.
Check if the USB charging cable is properly connected to
both the contacts of the charger and the device PWLS
06-10.
Check USB charging cable, charger and device PWLS
06-10 for damages. Do not use the damaged device
anymore if you detect any damages. Contact the Trotec
customer service.
Check the fuse (home).
Note
The integrated battery might possibly be defective.
Contact the Trotec customer service.
The device is not lit:
The batteries might possibly be empty. Replace them with
new batteries.
The battery power might be too low. Charge the battery via
the USB charging cable and a charger.
On the battery indication (4 blue LEDs), you can check
whether the battery has been completely charged.
Check the USB charging cable for damages. If the USB
charging cable is damaged, stop using it. Contact the
Trotec customer service.
Note
The LEDs are possibly damaged. Contact the Trotec
customer service.
Note
Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorized specialist electrical company or to
Trotec for repair.
Maintenance
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug of the charger with wet or
damp hands.
Switch the device off.
Hold onto the mains plug while pulling the power cable of
the charger out of the mains socket.
Disconnect the USB charging cable.
Allow the device to cool down completely.
Warning of electrical voltage
Maintenance tasks which require the housing to be
opened must only be carried out by authorised
specialist companies or by Trotec.
Notes on maintenance
The device does not require maintenance.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PWLS 05-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PWLS 05-10 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PWLS 05-10

Trotec PWLS 05-10 User Manual - German - 11 pages

Trotec PWLS 05-10 User Manual - Dutch - 11 pages

Trotec PWLS 05-10 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info