753358
13
Zoom out
Zoom in
Previous page
1/17
Next page
EN 12
Operating manual – cordless tacker PTNS 10-3,6V
2. Put the tacker guide nose(4) down on the respective spot
you want to tack. The tacker guide nose must be pushed in
by a few millimetres.
3. Pull the trigger(2).
2
4
ðThe wire nail or staple is injected into the workpiece.
4. Having driven the staple or wire nail in all the way, release
the trigger and withdraw the tacker guide nose from the
workpiece.
5. Set the on/off switch(6) to 0 to switch the device off.
6
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch off the device.
Hold onto the mains plug while pulling the power cable of
the charger out of the mains socket.
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
Troubleshooting tasks which require the housing to be opened
must only be carried out by an authorized specialist electrical
company or by Trotec.
Slight smoke or odour are emitted during first use:
This is not a fault. These phenomena disappear after a
brief runtime.
The device does not start:
The battery power might be too low. Recharge the battery.
Check the charger and charging socket for dirt. Remove
any dirt.
Check whether the charger is connected. If the charger is
connected, the device will not start.
Info
Wait for at least 10 minutes before switching the
device back on.
The battery does not charge:
Check whether the device is correctly connected to the
charger and whether the charger is correctly connected to
the power supply.
Check the power connection.
Check the power cable and mains plug for damages.
Check the fuse (home).
Check the charger for damages. Should the charger be
damaged, stop using it. Contact the Trotec customer
service.
Check the charger connection for dirt. Remove any dirt.
The battery might be defective. Contact the Trotec
customer service.
A wire nail or staple is jammed in the device:
Warning
Ensure that the device is switched off.
Make sure not to hold the device by the trigger when a
staple or wire nail is jammed inside!
The trigger could be actuated by accident while
removing a jammed staple or wire nail.
Open the magazine release and remove the wire nail or
staple.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PTNS10-3.6V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PTNS10-3.6V in the language / languages: English as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PTNS10-3.6V

Trotec PTNS10-3.6V User Manual - German - 17 pages

Trotec PTNS10-3.6V User Manual - Dutch - 17 pages

Trotec PTNS10-3.6V User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info