753294
9
Zoom out
Zoom in
Previous page
1/18
Next page
EN 9
cordless rotary hammer PRDS 10-20V
Scope of delivery
1 x Cordless rotary hammer PRDS 10-20V
1 x Rechargeable battery
1 x Quick charger
3 x SDS drill bits (150 mm, Ø 6/8/10 mm)
3 x HSS drill bits Ø 5/6/8 mm with hexagon retainer
4 x 50 mm bits for S2 material (5.5/PH1/PZ1/PZ2)
1 x SDS bit adapter
1 x Extension with magnetic bit holder
1 x Transport case
1x Manual
Technical data
Parameter Value
Model PRDS10-20V
Nominal voltage 20 V
Idle speed 0 – 900 rpm
Impact frequency 0– 5000bpm
Impact energy 1 J
Max. drilling diameter
Wood
Metal
Concrete
16 mm
8 mm
10 mm
Protection class III /
III
Weight 1.5 kg
Battery Multiflex20 – 2.0 DC
Type Li-ion
Nominal voltage 20 V
Capacity 2.0Ah
Quick charger Multiflex20 – 2.0 AC
Input
Nominal voltage 230 – 240 V/ 50 Hz
Power consumption 65 W
Output
Nominal voltage 21.5 V
Charging current 2.4 A
Charging time 1 h
Cable length 1.5 m
Protection class II /
Parameter Value
Vibration information according to EN60745
Total vibration emission value:
Handle
Vibration emission value ah(HD)
Uncertainty K
6.314 m/s²
1.5 m/s²
Additional handle
Vibration emission value ah(HD)
Uncertainty K
4.580 m/s²
1.5 m/s²
Sound values according to EN60745
Sound pressure level LpA 82.38 dB(A)
Sound power level LWA 93.38dB(A)
Uncertainty K 3 dB(A)
Wear hearing protection.
Excessive noise can lead to hearing loss.
Information on noise and vibration:
The vibration level specified in these instructions was
determined by means of a measuring method standardized
in EN60745 and can be used for a device comparison. The
specified vibration emission value may also be used for a
preliminary assessment of the exposure.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
The vibration level will change depending on the
application of the power tool and may in some cases differ
from the value specified in these instructions. The vibration
load may be underestimated if the power tool is used
regularly in such a way. For a precise estimation of the
vibration load during a certain work period, it is also
important to consider the periods during which the device
is switched off, or is running but not actually employed.
This can reduce the vibration load over the entire work
period significantly.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PRDS10-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PRDS10-20V in the language / languages: English as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PRDS10-20V

Trotec PRDS10-20V User Manual - German - 19 pages

Trotec PRDS10-20V User Manual - Dutch - 19 pages

Trotec PRDS10-20V User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info