753304
15
Zoom out
Zoom in
Previous page
1/18
Next page
EN 15
rotary hammer PRDS 11-230V
Info
If the function selector switch(3) is set to the
position and the switch for the impact mechanism (12)
to position , the device is in idle mode, i.e. there
will be no rotation or stroke motion due to technical
reasons.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch off the device.
Hold onto the mains plug while pulling the power cable out
of the mains socket.
If required, allow the device to cool down.
Remove the tool from the device (see Start-up chapter).
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
Available accessories
Warning
Only use accessories and additional equipment
specified in the instructions.
Using insertion tools or accessories other than those
specified in the instructions may cause a risk of injury.
Accessories Article number
11-piece SDS drill bit and chisel set 6.205.001.101
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
Troubleshooting tasks which require the housing to be opened
must only be carried out by an authorized specialist electrical
company or by Trotec.
Light smoke or odour is emitted during the first use:
This is not a fault. These phenomena disappear after a
brief runtime.
The device does not start:
Check the power connection.
Check the power cable and mains plug for damage. If you
notice damages, do not try to take the device back into
operation.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Check the on-site fusing.
Info
Wait for at least 10 minutes before switching the
device back on.
The motor is running, but there is no rotation or stroke
movement:
Check whether the function selector switch(3) is set to the
position and the switch for the impact mechanism(12)
to position . If so, the device is in idle mode. For
technical reasons there will be no rotation or stroke
motion. Use the two switches(3 and 12) to set the desired
operating mode.
The drill bit does not penetrate / hardly penetrates the
material:
Check whether the correct speed level is selected.
A higher speed level may be required in harder material.
The setting for drilling or impact drilling should
be selected.
Check whether the correct drill bit is selected.
Check whether the function selector switch(3) is set to
position . This position is only suitable for chiselling.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PRDS 11-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PRDS 11-230V in the language / languages: English as an attachment in your email.

The manual is 4,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PRDS 11-230V

Trotec PRDS 11-230V User Manual - German - 19 pages

Trotec PRDS 11-230V User Manual - Dutch - 19 pages

Trotec PRDS 11-230V User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info