753905
14
Zoom out
Zoom in
Previous page
1/21
Next page
14 EN
cordless sabre saw PRCS 10-20V
Adjusting the pendulum action
Additionally, you can activate the pendulum movement of the
saw blade. Level1 (pendulum movement on) allows for a faster
work progress and level0 (pendulum movement off) enables
fine and clean cutting edges.
The ideal pendulum level for the respective application can be
determined by way of field-testing. Please observe the following
instructions:
Deactivate pendulum action to achieve fine and clean
cutting edges.
Switch off the pendulum action when processing thin
materials.
Work with the pendulum action deactivated when
processing hard materials.
For soft materials or when sawing wood with the grain you
can work with the pendulum action activated.
1. In order to activate pendulum action, set the pendulum
action selector switch(16) to level1. The pendulum action
can also be adjusted during operation.
16
Operation
Tips and notes on handling the sabre saw
General information:
Keep the venting slots clear to prevent the motor from
overheating.
Check the tool in the tool holder for proper fit before every
application. The tool must be firmly locked in place in the
designated holding fixtures in the tool holder.
Before every application, make sure that you have selected
the correct tool for the intended use.
Sawing:
Before sawing wood, chipboards, building materials etc.,
check the above for foreign objects, e.g. nails, screws or
similar. If required, remove the foreign objects or use a
suitable saw blade.
Only use intact, flawless saw blades. Bent, blunt or
otherwise damaged saw blades could break.
When sawing lightweight construction materials, make
sure to observe the legal regulations and
recommendations of the material manufacturers.
Use a narrow saw blade when sawing tight curves.
If the saw blade gets jammed in the workpiece, switch off
the power tool immediately. The sawing gap should be
slightly widened with a suitable tool so that you can pull
out the power tool.
Switch on the power tool and guide it towards the
workpiece to be processed. Place the guide shoe on the
surface of the workpiece. Process the workpiece with an
even forward motion and contact pressure. After
completing the sawing operation, switch off the power
tool.
The saw blade should not be longer than required for the
intended cut.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PRCS 10-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PRCS 10-20V in the language / languages: English as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PRCS 10-20V

Trotec PRCS 10-20V User Manual - German - 23 pages

Trotec PRCS 10-20V User Manual - Dutch - 23 pages

Trotec PRCS 10-20V User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info