753362
11
Zoom out
Zoom in
Previous page
1/15
Next page
EN 11
cordless polisher PPOS 10-20V
Checking the battery charging status
The battery comes with an integrated battery level indication.
The battery status is displayed as follows by the three LEDs of
the battery level indication(9):
LED colour Meaning
Green – Orange – Red maximum charge/ power
Orange – Red medium charge/ power
Red weak charge – Recharge the
battery.
1. Press on the battery icon(13) on the battery(6).
ðYou can read the battery status from the battery level
indication(9).
13
9
Placing the polishing bonnet on the device
1. Remove the battery from the device.
2. Turn the bottom of the device up.
3. Pull the polishing bonnet(7 or 8) over the polishing
disc(3).
3
7/8
Operation
Tips and notes on handling the polishing machine
General information:
Make sure that the surface to be treated and the polishing
bonnets are free from dirt. Dirt particles can cause
scratches on the surface.
Slowly guide the device along the surface to be polished.
Do not apply grinding pressure.
If there are any areas difficult to access, remove the
polishing bonnet from the polishing disc and treat the
areas manually.
Make sure that the paint to be treated has been thoroughly
cleaned and is completely dry. Heavily oxidised paint
requires a special cleaning agent.
Only use high-quality products for waxing and polishing
and observe the process information of the manufacturer
specified on the packaging.
Applying the polish:
Use the supplied cloth polishing bonnet for applying the
polish.
Evenly distribute the polishing agent all the way to the
edge of the cloth polishing bonnet.
Dab the cloth polishing bonnet on several spots of the
surface to be polished. Once more, any excess polishing
agent will distribute in the cloth polishing bonnet and on
the surface to be polished.
Avoid using too much polishing agent. Later on, this will
only make it more difficult to remove the layer of the
polishing agent on the paint and does not improve the
result.
Make sure to apply the polishing agent evenly to obtain an
equally thin coating without any left-out spots.
If you apply the polishing agent on a vehicle, treat all even
and large surfaces (e.g. bonnet of the car, boot lid and
roof) first. Afterwards, treat the smaller areas such as
doors and car wings.
Polishing surfaces:
Use the supplied synthetic fibre polishing bonnet for
polishing.
Prior to polishing, make sure that the polishing agent has
lightly dried on the entire surface.
Treat the surfaces in the same order as you applied the
polishing agent before. Treat even and large areas first.
Then, treat smaller areas.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PPOS10-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PPOS10-20V in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PPOS10-20V

Trotec PPOS10-20V User Manual - German - 15 pages

Trotec PPOS10-20V User Manual - Dutch - 15 pages

Trotec PPOS10-20V User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info