689480

Trotec PMTS10 - 230V Manual

11
Zoom out
Zoom in
Previous page
1/19
Next page
EN 10
300W multi-function tool PMTS 10-230V
5. Fold back the tool release lever(1).
1
6. Check whether the tool is properly locked in place.
Oscillation rate selection
The required oscillation rate depends on the material and the
operating conditions and can be determined by way of field-
testing. For sawing, cutting and grinding harder materials such
as wood or metal we recommend oscillation rate 6, in case of
softer materials, e.g. plastics, best use oscillation rate 4. The
setting range covers the levels 1 - 6 (15,000 - 21,000rpm). You
can change the preselected oscillation rate at any time.
1. Turn the setting wheel(3) to the desired oscillation rate.
3
Connecting the power cable
• Insert the mains plug into a properly secured mains
socket.
Operation
Tips and notes on handling the multi-function tool
General information:
• Keep the venting slots clear to prevent the motor from
overheating.
• Check the tool in the tool holder for proper fit before every
application. The tool must be firmly locked in place in the
designated holding fixtures in the tool holder.
• Before every application, make sure that you have selected
the correct tool for the intended use.
Sawing:
• Only use intact, flawless saw blades. Bent, blunt or
otherwise damaged saw blades could break.
• When sawing lightweight construction materials, make
sure to observe the legal regulations and
recommendations of the material manufacturers.
• Only soft materials such as plasterboard or the like may be
processed using the plunge-cutting method!
• Before sawing wood, chipboards, building materials etc.
with HCSblades, check the above for foreign objects, e.g.
nails, screws or similar. If required, remove the foreign
objects or use bi-metal saw blades.
• Use a narrow saw blade when sawing tight curves.
• The saw blade should not be longer than required for the
intended cut.
Cutting:
• Only use intact, flawless cutting blades. Bent, blunt or
otherwise damaged cutting blades could break.
• When cutting wall tiles, bear in mind that the insertion
tools are subjected to a high level of wear during longer
operation.
Scraping:
• Choose a high oscillation rate for scraping.
• On soft ground (e.g. wood) work at a shallow angle and
with only little contact pressure. Otherwise the scraping
knife could cut into the ground.
Sanding:
• Maintain a consistent grinding pressure to increase the
lifetime of the sanding sheets.
• Choose from the different sanding sheets (red for wood,
black for metal) in due consideration of the material to be
processed and the desired surface abrasion.
• Avoid the accumulation of dust at the workplace, always
use a dust extraction system when grinding.
• Use the coarse triangular sanding sheets (e.g. 60 grit) for
rough grinding and the fine ones (e.g. 240 grit) for fine and
finish grinding.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMTS10 - 230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMTS10 - 230V in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMTS10 - 230V

Trotec PMTS10 - 230V User Manual - German - 20 pages

Trotec PMTS10 - 230V User Manual - Dutch - 19 pages

Trotec PMTS10 - 230V User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info