689480
6
Zoom out
Zoom in
Previous page
1/19
Next page
5 EN
300W multi-function tool PMTS 10-230V
Warning of sharp object
Parts of the saw blade are sharp. Risk of injuries if
handled without due care.
Wear protective gloves!
Warning
Toxic dusts!
The harmful / toxic dusts produced during operation
pose of risk to the health of the operator and persons
in the vicinity.
Wear eye protection and a dust mask!
Warning
Do not process materials containing asbestos.
Asbestos is considered carcinogenic.
Warning
Make sure not to hit power, gas or water lines when
working with a power tool.
If necessary, use a pipe detector to check the wall you
want to drill in or slit open.
Warning
Risk of injuries caused by flying parts or bursting tool
heads.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Caution
The tool release lever must be fully closed before
switching the device on, for insertion tools clamped
insufficiently or incorrectly could be catapulted out of
the tool holding fixture uncontrollably upon switch-on.
Caution
The tool release lever must be fully closed before
switching the device on, for otherwise the lever could
snap back upon switch-on.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
Caution
Keep a sufficient distance from heat sources.
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Behaviour in the event of an emergency
1. Switch the device off.
2. In an emergency, disconnect the device from the mains
feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.
3. Do not reconnect a defective device to the mains.
Information about the device
Device description
The multi-function tool PMTS10-230V is equipped with a
powerful 300W motor.
Up to 21,000 times per minute the insertion tool moves to and
fro by 3.2° owing to the oscillating drive. This guarantees
precise working in a very confined space.
The integrated oscillation rate selection permits an optimally
adjusted exertion of force for each application.
Using the quick-release system you can exchange accessories
without tools in a matter of seconds.
The anti-vibration handle ensures optimum guidance and
vibration-damped working.
It is suited particularly well for working close to or lined up with
the edge.
To avoid an excessive formation of dust and dirt during grinding
work, simply connect the convenient dust extraction system
(included in the scope of delivery) to a vacuum cleaner.
For yet more application possibilities you can of course combine
your multi-function tool with further accessories, e.g. the
original Trotec accessory set for bathroom restoration.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMTS10 - 230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMTS10 - 230V in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMTS10 - 230V

Trotec PMTS10 - 230V User Manual - German - 20 pages

Trotec PMTS10 - 230V User Manual - Dutch - 19 pages

Trotec PMTS10 - 230V User Manual - French - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info