689479
5
Zoom out
Zoom in
Previous page
1/22
Next page
EN 4
cordless multi-function tool PMTS 10-12V
Warning
Fire hazard! Avoid overheating of the material to be
sanded and the sander. Before taking work breaks
always empty the dust container.
Unfavourable conditions such as flying sparks when
sanding metal render abrasive dust in the dust bag,
micro filter, paper bag (or in the filter bag or filter of the
vacuum cleaner) prone to self-ignition. The risk is
particularly high when the abrasive dust is mixed with
residues of paint, polyurethane or other chemical
substances and the sanding material is hot after a
longer period of work.
Keep your hands out of the sawing area. Do not reach
underneath the workpiece. Risk of injury upon contact
with the saw blade.
Use appropriate detection equipment to track down
concealed supply lines or consult the local utility
companies. Contact with electrical lines may result in fire
and electric shock. Damaging a gas line may lead to an
explosion. Penetrating a water line causes property
damage and may cause an electric shock.
During operation hold onto the power tool with both
hands and make sure you stand firmly on the ground.
It is safer to handle the power tool with two hands.
Use the anti-vibration handle supplied with the device.
Losing control of the power tool may result in personal
injury.
Secure the workpiece. The grip of tensioning devices or a
vice is more secure than holding the workpiece only by
hand.
Wear protective gloves when changing the insertion
tools. The applied tools heat up during longer
operation.
Do not scrape moistened material (e.g. wallpaper) and
not on moist subsurfaces either. Water entering a power
tool will increase the risk of electric shock.
Do not treat the surface to be processed with liquids
containing solvents. Toxic fumes may be produced
during scraping owing to the heat-up of the materials.
Exercise particular caution when using scraper and
cutter. These tools are especially sharp involving a risk of
injury.
Ensure sufficient ventilation when processing plastics,
paints, varnishes etc.
Wait until the device has come to a standstill, before
putting it down.
Intended use
Only use the device PMTS 10-12V:
For sawing and cutting
Wood
Plastic
Plaster
Non-ferrous metals
Fixing elements
(e.g. screws, nails, clamps etc.)
For processing soft wall tiles
For sanding and scraping of small, dry areas
whilst adhering to the technical data.
We recommend using the power tool with original Trotec
accessories.
Improper use
Do not use the device PMTS 10-12V for:
cutting up tiles
sawing large screws or stainless steel
processing workpieces requiring a continuous water
supply
Only use the device in weatherproof surroundings.
Personnel qualifications
People who use this device must:
be aware of the dangers that occur when working with
electric devices in damp areas.
have read and understood the operating manual, especially
the Safety chapter.
Personal protective equipment
Wear hearing protection.
Excessive noise can lead to hearing loss.
Wear eye protection.
With it you protect your eyes from splintering, falling
and flying pieces which could cause injuries.
Wear a protective mask.
It saves you from inhaling harmful dusts generated
when processing workpieces.
Wear protective gloves.
They protect your hands from burns, crushing injuries
and skin abrasions.
Wear tight-fitting protective clothing.
This protects you from the draw-in and entanglement
hazard posed by rotating parts.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PMTS10 - 12V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PMTS10 - 12V in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PMTS10 - 12V

Trotec PMTS10 - 12V User Manual - German - 23 pages

Trotec PMTS10 - 12V User Manual - Dutch - 23 pages

Trotec PMTS10 - 12V User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info