753902
15
Zoom out
Zoom in
Previous page
1/20
Next page
EN 15
850W pendulum action jigsaw PJSS 12-230V
Switching the device on and off
Wear your personal protective equipment when working with
the device.
1. Check whether the fixed saw blade, the set stroke rate, the
pendulum action and the cutting angle are suitable for the
intended application.
2. Check whether the workpiece is secured and the worktop
prepared correspondingly.
3. Position the base plate with the sliding block(6) on the
workpiece.
4. Press the on/off switch(2) and hold it during operation.
19
2
6
5. Let go of the on-/off-switch(2) to stop the device.
Switching continuous operation on and off
Info
The device comes equipped with a restart protection.
In the event of a temporary power failure, the lock-on
switch of the on/off switch is automatically
deactivated. The on/off switch switches off and thus
prevents an unintentional restarting of the device. To
restart the device, the on/off switch must be actuated
again.
When continuous operation is activated, the on/off switch does
not have to be held permanently, which makes working more
comfortable.
1. Proceed as described in the chapter Switching the device
on and off, steps 1 to 4.
2. Push the lock-on switch(19) to the left or right with your
thumb until the lock-on switch is completely pushed in on
one side.
3. Let go of the on/off switch(2) and continue holding the
device.
ðThe device keeps running and continuous operation is
activated.
4. Press the on/off switch(2) to stop continuous operation.
ðThe lock-on switch(19) automatically returns to centre
position.
5. Let go of the on-/off-switch(2) to stop the device.
Setting the splinter blow-off/suction function
You can choose whether the splinters shall be blown off towards
the front or sucked off with an optionally connectable vacuum
cleaner.
1. Make sure that the protective cover(16) is mounted.
2. Slide the blow-off/suction function selector switch(4) to
the left to suck the splinters in using an external vacuum
cleaner, or to the right to blow the splinters away.
16
4
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PJSS12-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PJSS12-230V in the language / languages: English as an attachment in your email.

The manual is 2,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PJSS12-230V

Trotec PJSS12-230V User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info