753370
13
Zoom out
Zoom in
Previous page
1/19
Next page
EN 12
Operating manual – 850W pendulum action jigsaw PJSS 10-230V
1. Set the pendulum action selector switch(5) to the desired
level. The higher the level, the larger the pendulum stroke.
The pendulum action can also be adjusted during
operation.
I
II
III
0
5
Connecting the power cable
1. Insert the mains plug into a properly secured mains
socket.
Operation
Tips and notes on handling the jigsaw
General information:
Keep the venting slots clear to prevent the motor from
overheating.
Check the tool in the tool holder for proper fit before every
application. The tool must be firmly locked in place in the
designated holding fixtures in the tool holder.
Before every application, make sure that you have selected
the correct tool for the intended use.
Sawing:
Only use intact, flawless saw blades. Bent, blunt or
otherwise damaged saw blades could break.
When sawing lightweight construction materials, make
sure to observe the legal regulations and
recommendations of the material manufacturers.
Before sawing wood, chipboards, building materials etc.
with HCSblades, check the above for foreign objects, e.g.
nails, screws or similar. If required, remove the foreign
objects or use HSS saw blades.
Use a narrow saw blade when sawing tight curves.
The saw blade should not be longer than required for the
intended cut.
Switching the LED work lamp and laser on and off
The device is equipped with an LED work lamp to illuminate the
workpiece and with a laser to mark the cutting path. The laser is
best suited for cuts with a 0° cutting angle.
Warning of laser radiation
Laser class2, Pmax.: <1mW, λ: 650nm,
EN60825-1:2014
Do not look directly into the laser beam or the opening
from which it emerges.
Never point the laser beam at people, animals or
reflective surfaces. Even brief eye contact can lead to
eye damage.
Examining the laser output aperture by use of optical
instruments (e.g. magnifying glass, magnifiers and the
like) entails the risk of eye damage.
When working with a laser of class2, observe the
national regulations on wearing eye protection.
The LED work lamp and laser can be switched on and off in the
following combinations:
LED work lamp and laser on
1 x =
LED work lamp on, laser off
2 x =
LED work lamp off, laser on
3 x =
LED work lamp and laser off
4 x =
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PJSS10-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PJSS10-230V in the language / languages: English as an attachment in your email.

The manual is 2,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PJSS10-230V

Trotec PJSS10-230V User Manual - German - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info