753289
12
Zoom out
Zoom in
Previous page
1/16
Next page
12 EN
cordless impact driver PIDS 10-20V
Using sockets
If you want to screw hexagon screws or nuts, you can use the
supplied square socket adapter(10) and a socket. To do so,
please proceed as follows:
1. Insert the square socket adapter(10) into the tool
holder(1) as described in the chapter Tool change.
2. Slide the matching socket onto the square socket
adapter(10) until it perceptibly clicks into place.
10
3. Check the socket for tight fit.
Operation
Wear hearing protection.
Excessive noise can lead to hearing loss. The sound
pressure level LpA of this device amounts to 93.9dB(A).
Tips and notes on handling the cordless impact driver/
cordless impact wrench
General information:
Check the tool in the tool holder for proper fit before every
application.
The centre position of the clockwise/ counter-clockwise
rotationswitch (lock) is suited for work breaks or tool
change.
Screwing:
In case of soft wood, screws can be screwed in without
pre-drilling.
In case of hard wood or large screws, it is recommended
to use a drill for pre-drilling.
When using countersunk screws, the drill hole should be
countersunk beforehand.
Especially smaller screws and bits may be damaged when
selecting an excessive torque and / or speed at the tool.
Selecting the rotational direction
Note
To avoid damaging the gear, only change the rotational
direction when the device is at a standstill.
The motor's rotational direction can be changed by means of
the switch for clockwise/ counter-clockwise rotation(2).
1. Press the switch for clockwise/ counter-clockwise
rotation(2) in all the way on that side towards which the
motor shall rotate.
I. II.
2
I. Screwing in II. Unscrewing
2. Carry out a short test run to see whether the rotational
direction matches the intended application. A wrong
rotational direction may damage the tool and/ or
workpiece.
3. If required, set the switch for clockwise/ counter-
clockwise rotation(2) to centre position (lock) to block the
on/off switch(3).
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PIDS 10-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PIDS 10-20V in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PIDS 10-20V

Trotec PIDS 10-20V User Manual - German - 16 pages

Trotec PIDS 10-20V User Manual - Dutch - 16 pages

Trotec PIDS 10-20V User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info