753285
13
Zoom out
Zoom in
Previous page
1/18
Next page
EN 13
Impact drill PHDS 10-230V
Switching the device on and off
Wear your personal protective equipment when working with
the device.
1. Check whether the tool clamped in and the selected speed
level are suitable for the intended application.
2. Check whether the workpiece is secured and the worktop
prepared correspondingly.
3. Check whether the correct rotational direction is selected.
4. If you work with activated impact mechanism, press the
tool against the workpiece.
5. Hold onto the device with both hands.
6. Press the on/off switch(10) and hold it during operation.
You can control the speed by pressing the on/off
switch(10): press lightly for a low speed; press firmly for a
high speed. The previously selected speed applies.
ðThe device operates with the previously selected
settings.
10
7. Let go of the on/off switch(10) to stop the device.
Switching continuous operation on and off
When continuous operation is activated, the on/off switch does
not have to be held permanently, which makes working more
comfortable.
1. Proceed as described in the chapter Switching the device
on and off, steps 1 to 5.
2. Press the button for continuous operation(4) with your
thumb until it locks in place completely.
10 4
I. II.
3. Let go of the on/off switch(10) and continue holding the
device.
ðThe on/off switch is locked in place.
ðThe device keeps running and continuous operation is
activated.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PHDS 10-230V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PHDS 10-230V in the language / languages: English as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PHDS 10-230V

Trotec PHDS 10-230V User Manual - German - 20 pages

Trotec PHDS 10-230V User Manual - Dutch - 20 pages

Trotec PHDS 10-230V User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info