753341
4
Zoom out
Zoom in
Previous page
1/14
Next page
4 EN
cordless glue gun PGGS 10-20V
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
General Power Tool Safety Warnings– Battery tool
use and care
Recharge only with charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designed battery
packs. Use of any other battery packs may create a risk of
injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130°C may cause explosion.
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outsides the specified range may damage
the battery and increase the risk of fire.
General Power Tool Safety Warnings– Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Never service damaged battery pack. Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
Device-specific safety warnings for glue guns
Only place the device on fireproof, non-heat-
conducting and solid surfaces. The heat generated by
the device during operation entails a risk of fire.
Do not use flammable solvents for cleaning the areas
to be glued. Fire hazard.
Do not touch the nozzle or the glue stick. The nozzle
and the glue stick can reach temperatures exceeding
180°C.
Do not allow hot glue to come into contact with people
or animals. In case of skin contact immediately hold the
affected area under a jet of cold water for several minutes.
Do not try to remove the glue from your skin.
Do not pull the glue stick out of the nozzle. Touching
hot glue can cause severe burns and the power tool can be
damaged.
Never use the glue gun at ambient temperatures below
15°C or above 75°C.
Do not use the glue gun in an environment with direct,
cold wind. The device's efficiency decreases and energy
is lost.
In case of continued use, do not apply excessive
pressure on the trigger. The glue gun can be damaged.
Tasks which require the housing to be opened must
only be carried out by authorised specialist
companies.
If the glue escapes towards the rear, stop using the
tool immediately! Have it cleaned by a specialist
company before further use.
Intended use
Only use the device PGGS 10-20V for bonding wood, cardboard,
packaging material, leather, ceramic, glass, carpet, seals,
plastic, fabric, cork and metal using hot-melt glue whilst
adhering to the technical data. The workpieces to be bonded
must be clean, dry and free of grease.
We recommend using the power tool with original Trotec
accessories.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PGGS 10-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PGGS 10-20V in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PGGS 10-20V

Trotec PGGS 10-20V User Manual - German - 16 pages

Trotec PGGS 10-20V User Manual - Dutch - 15 pages

Trotec PGGS 10-20V User Manual - French - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info