753339
9
Zoom out
Zoom in
Previous page
1/14
Next page
EN 8
Operating manual – cordless glue gun PGGS 10-3,7V
Operation
Tips and notes on handling the glue gun
General information:
Degrease metallic surfaces before gluing. Processing
machines often leave oil residues.
The glue cannot be completely removed from textiles. Due
to its high melting point, even hot washing does not
remove the glue.
Moisture can make the glue joint come undone.
If required, use special glue sticks for different types of
material.
If your skin comes into contact with hot glue, immediately
hold the affected area under a jet of cold water for several
minutes.
The materials to be bonded and the surface on which you
are working must neither be highly flammable nor
combustible.
When working with heat-sensitive materials, use a sample
to test whether the material is suited for hot gluing.
Gluing:
Apply the glue in zigzag lines when working with flexible
materials such as textiles.
Heat up quickly cooling materials such as steel e.g. using a
heat gun to improve the adhesive bonding.
Briefly press the workpieces together by hand after gluing.
A clamping device is not required.
You can use the device for point gluing or seam gluing.
Glue joints can be dissolved again by heating.
Glue residues can easily be removed from the nozzle after
the tool has cooled down.
After cooling, remove the glue residues ideally with a sharp
knife.
The glue joints can be painted.
Roughen smooth surfaces before gluing.
Switching the device on and off
Wear your personal protective equipment when working with
the device.
1. Press the on/off switch(2) until the status LED(1) lights up
red.
12
ðThe glue is being heated.
ðOnce the device has reached its operating temperature,
the status LED lights up green.
ðThe device is ready for operation.
2. Switch off the device by pressing the on/off switch(2) until
the status LED(1) goes out.
2
1
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PGGS 10 - 3.7V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PGGS 10 - 3.7V in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PGGS 10 - 3.7V

Trotec PGGS 10 - 3.7V User Manual - German - 14 pages

Trotec PGGS 10 - 3.7V User Manual - Dutch - 15 pages

Trotec PGGS 10 - 3.7V User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info