753910
17
Zoom out
Zoom in
Previous page
1/24
Next page
EN 17
portable circular saw PCSS 10-1400
Adjusting the speed
You can adjust the speed at any time. Level1 corresponds to a
low speed and level6 to a high speed.
1. Turn the setting wheel(24) to the desired level.
24
As an orientation for selecting the speed level, you can use the
table below, which contains non-binding recommendations:
Material Recommended
level
Acrylic glass plates, Plexiglas 2 to 4
Aluminium plates 4 to 6
Aluminium profiles 4 to 6
Coated and veneered plates 6
Plasterboards 1 to 2
PVC plates 3 to 5
Hardwood and softwood (solid wood) for
cross and longitudinal cuts
6
Chipboards, hardboards 6
Mineral wool boards 1 to 2
Blockboards, plywood 6
Cement-bonded particle boards 1 to 2
Checking the pendulum guard
The pendulum guard is an important safety device of the power
tool. It must function properly; otherwise the device must not be
used.
Observe the following information:
Safety warnings for circular saws with pendulum guard
and circular saws with tow guard – Lower guard function
Check the lower guard for proper closure before each
use. Do not operate the saw if the lower guard does
not move freely and close immediately. Never clamp or
tie the lower guard in the open position. The lower
guard may be bent if the saw accidentally falls to the floor.
Use the retracting lever to raise the guard and make sure
that it moves freely and does not touch the blade or any
other part of the saw at all cutting angles and depths of
cut.
Check that the lower guard spring operates correctly.
If the guard and spring do not operate correctly, have
the saw serviced before use. Lower guard may operate
sluggishly due to damaged parts, gummy deposits, or a
build-up of debris.
Lower guard may be retracted manually only for
special cuts such as "plunge cuts" and "compound
cuts". Raise lower guard by retracting lever and as
soon as blade enters the material, the lower guard
must be released. For all other sawing, the lower guard
should operate automatically.
Always observe that the lower guard is covering the
blade before placing saw down on bench or floor. An
unprotected, coasting blade will cause the saw to walk
backwards, cutting whatever is in its path. Be aware of the
time it takes for the blade to stop after switch is released.
Connecting the power cable
1. Insert the mains plug into a properly secured mains
socket.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PCSS 10-1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PCSS 10-1400 in the language / languages: English as an attachment in your email.

The manual is 5,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PCSS 10-1400

Trotec PCSS 10-1400 User Manual - German - 25 pages

Trotec PCSS 10-1400 User Manual - Dutch - 24 pages

Trotec PCSS 10-1400 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info