753908
18
Zoom out
Zoom in
Previous page
1/20
Next page
18 EN
mini cordless portable circular saw PCSS 05-20V
The saw blade is loose:
Check the saw blade for tight fit.
Check the flange and flange nut for tight fit. Do not use
flanges or flange nuts whose bore hole is larger or smaller
than that of the saw blade.
The saw blade experiences difficulties penetrating the
material to be processed or the sawing performance is
insufficient:
If the saw blade is worn, replace it with a new one.
Check whether the chosen saw blade is suitable for the
material to be processed.
The cutting performance decreases:
Check whether the saw blade is suitable for the
application.
Keep the saw blade clean. If necessary, replace worn or
damaged saw blades.
Resin or glue residues may impair the quality of the cut.
Keep the venting slots clear to prevent the motor from
overheating.
Check the charging status of the battery. The displayed
battery capacity might be within the red range indicating
that the battery should be charged.
The device becomes hot:
Check whether the chosen saw blade is suitable for the
task to be carried out.
Keep the venting slots clear to prevent the motor from
overheating.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorised specialist electrical company or to
Trotec for repair.
Maintenance
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug or the battery with wet or
damp hands.
Switch off the device.
Allow the device to cool down completely.
Remove the battery from the device.
Warning of electrical voltage
Maintenance tasks which require the housing to be
opened must only be carried out by authorised
specialist companies or by Trotec.
Notes on maintenance
Inside the device, there are no parts that need to be maintained
or lubricated by the user.
Cleaning
The device should be cleaned before and after each use.
Note
The device does not have to be lubricated after
cleaning.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Clean the device with a soft, damp and lint-free cloth.
Make sure that no moisture enters the housing. Protect
electrical components from moisture. Do not use any
aggressive cleaning agents such as cleaning sprays,
solvents, alcohol-based or abrasive cleaners to dampen
the cloth.
Dry the device with a soft, lint-free cloth.
Clean the saw blades immediately after use to keep them
free of resin or glue residues.
Keep the connecting terminals on the device and charger
clean.
Keep the connecting terminals on the battery pack clean.
Keep the ventilation openings free from dust deposits to
prevent overheating of the motor.
Non-coated saw blades can be protected against corrosion
by applying a thin layer of acid-free oil. Remove any oil
before starting to saw to prevent oil residues from reaching
the wood.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PCSS 05-20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PCSS 05-20V in the language / languages: English as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PCSS 05-20V

Trotec PCSS 05-20V User Manual - German - 21 pages

Trotec PCSS 05-20V User Manual - Dutch - 20 pages

Trotec PCSS 05-20V User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info