753912
17
Zoom out
Zoom in
Previous page
1/23
Next page
EN 16
cordless angle grinder PAGS 20-115
7. Put the cutting disc(17) on the mounting flange(15).
The labelling must point to the device. Make sure that the
cutting disc hole fits the mounting flange without
clearance. Do not use any reducers or adapters.
17
15
8. Screw the clamping nut(16) back on.
The flat side of the clamping nut must point to the device.
16
9. Press the spindle lock(1) to lock the gears.
10. Slowly turn the clamping nut(16) to the locking point until
the lock is fixed. Press and hold the spindle lock(1).
11. Retighten the clamping nut(16) by means of the face
spanner(11). Then let go of the spindle lock(1).
Pay attention not to damage the cutting disc.
1
11 16
12. Check the cutting disc(17) for proper fit.
13. Check whether the cutting disc can rotate freely. Make
sure that the disc does not touch the guard or other parts.
14. Carry out a test run of approx.1minute without load prior
to every disc change and every start-up in order to check
the cutting disc for correct fit.
15. Put the face spanner(11) back into the additional
handle(14) for storage.
16. Put the battery back in.
Caution
If the disc is out-of-round, rotates unevenly, vibrates,
oscillates, or if unusual noises or sparks are generated,
the cutting disc must be exchanged immediately.
Otherwise, there is a risk of injury.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAGS 21-115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAGS 21-115 in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAGS 21-115

Trotec PAGS 21-115 User Manual - German - 25 pages

Trotec PAGS 21-115 User Manual - Dutch - 25 pages

Trotec PAGS 21-115 User Manual - French - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info