753916
11
Zoom out
Zoom in
Previous page
1/20
Next page
EN 11
angle grinder PAGS 10-230
Start-up
Unpacking the device
Take the transport case out of the packaging.
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
Check the contents of the transport case for completeness
and look for damages.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Dispose of the packaging material according to the
national regulations.
Mounting the handle
Caution
Only use the device with the supplied additional
handle.
The additional handle(9) must be mounted before start-up.
To do so, please proceed as follows:
1. Screw the additional handle(9) clockwise into the
thread(2) either on the right- or left-hand side or on top of
the housing.
2
2
9
2
9
9
2. Check the additional handle(9) for tight fit.
3. For disassembly unscrew the additional handle(9)
counter-clockwise.
Adjusting the guard
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Do not touch the mains plug with wet or damp hands.
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Caution
If you detect damage at the guard, stop using the
device.
The guard is preassembled.
Only use the angle grinder with the guard mounted to protect
yourself and your environment from flying sparks, detached
parts and accidental contact with the cutting disc.
The guard must be adjusted in a way that sparks cannot ignite
combustible parts, including those present in the surroundings.
The guard must be adjusted in a way that flying sparks and
detached parts cannot hit the user.
To adjust the guard(8), please proceed as follows:
1. Open the locking lever(12).
12
8
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAGS 10-230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAGS 10-230 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAGS 10-230

Trotec PAGS 10-230 User Manual - German - 22 pages

Trotec PAGS 10-230 User Manual - Dutch - 22 pages

Trotec PAGS 10-230 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info