Manual Trotec PAGS 10-230 (page 6 of 20) (English)

753916

Zoom out

Zoom in

1/20

6 EN

angle grinder PAGS 10-230

•Always use undamaged wheel flanges that are of

correct size and shape for your selected wheel. Proper

wheel flanges support the wheel thus reducing the

possibility of wheel breakage. Flanges for cut-off wheels

may be different from grinding wheel flanges.

•Do not use worn down wheels from larger power tools.

Wheel intended for larger power tool is not suitable for the

higher speed of a smaller tool and may burst.

Additional Safety Warnings Specific for Abrasive

Cutting-Off Operations

•Do not "jam" the cut-off wheel or apply excessive

pressure. Do not attempt to make an excessive depth

of cut. Overstressing the wheel increases the loading and

susceptibility to twisting or binding of the wheel in the cut

and the possibility of kickback or wheel breakage.

•Do not position your body in line with and behind the

rotating wheel. When the wheel, at the point of operation,

is moving away from your body, the possible kickback may

propel the spinning wheel and the power tool directly at

you.

•When wheel is binding or when interrupting a cut for

any reason, switch off the power tool and hold the

power tool motionless until the wheel comes to a

complete stop. Never attempt to remove the cut-off

wheel from the cut while the wheel is in motion

otherwise kickback may occur. Investigate and take

corrective action to eliminate the cause of wheel binding.

•Do not restart the cutting operation in the workpiece.

Let the wheel reach full speed and carefully re-enter

the cut. The wheel may bind, walk up or kickback if the

power tool is restarted in the workpiece.

•Support panels or any oversized workpiece to

minimize the risk of wheel pinching and kickback.

Large workpieces tend to sag under their own weight.

Supports must be placed under the workpiece near the line

of cut and near the edge of the workpiece on both sides of

the wheel.

•Use extra caution when making a "pocket cut" into

existing walls or other blind areas. The protruding wheel

may cut gas or water pipes, electrical wiring or objects

that can cause kickback.

Safety Warnings Specific for Wire Brushing

Operations

•Be aware that wire bristles are thrown by the brush

even during ordinary operation. Do not overstress the

wires by applying excessive load to the brush. The wire

bristles can easily penetrate light clothing and/or skin.

•If the use of a guard is recommended for wire

brushing, do not allow any interference of the wire

wheel or brush with the guard. Wire wheel or brush may

expand in diameter due to work load and centrifugal

forces.

Device-specific safety warnings for angle grinders

•Use suitable detectors to determine if utility lines are

hidden in the work area or call the local utility

company for assistance. Contact with electrical lines

may result in fire and electric shock. Damaging a gas line

may lead to an explosion. Penetrating a water line causes

property damage and may cause an electric shock.

•If the power supply is interrupted, e.g. due to a power

failure or because the mains plug has been pulled out,

unlock the on/off switch and set it to the off position.

This is done to prevent uncontrolled restart.

•Do not touch the abrasive wheels and cutting discs

until they have cooled down. The wheels and discs

become very hot during operation.

•Secure the workpiece. The grip of tensioning devices or a

vice is more secure than holding the workpiece only by

hand.

Intended use

Only use the device PAGS 10-230:

• for cutting, grinding and brushing metal as well as stone

materials without the use of water.

• for cutting tiles and concrete blocks. When cutting stone,

an adequate dust extraction system must be provided.

We recommend using the power tool with original Trotec

accessories.

Foreseeable misuse

• Operations such as polishing are not recommended to be

performed with this power tool.

• Do not use accessories that require liquid coolants.

• Do not use this power tool for processing wood.

Any other use than the one described in the chapter "Intended

use" is regarded as reasonably foreseeable misuse.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAGS 10-230 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAGS 10-230

Trotec PAGS 10-230 User Manual - German - 22 pages

Trotec PAGS 10-230 User Manual - Dutch - 22 pages

Trotec PAGS 10-230 User Manual - French - 22 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trotec PAGS 10-230 Manual

Product: