728003
10
Zoom out
Zoom in
Previous page
1/19
Next page
10 EN
air cooler PAE 29
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Press the On/ Off button(13) on the device.
ð An acoustic signal is emitted.
ð The device automatically starts in ventilation mode.
ð The Fan Speed LED of stage1(22) is illuminated on the
display.
Setting the operating mode
The device comes with the following operating modes:
air cooling
Ventilation
Air freshening
Night mode
air cooling
In Air cooling mode the pump is switched on. The water is
distributed over the evaporation filter to cool the circulating air
with water.
Please proceed as follows to activate air cooling:
1. Press the Air cooling button(18) on the device.
ð The Air cooling LED(23) is illuminated.
ð The pump starts.
2. Press the Fan Speed button(14) to set another fan stage.
3. Press the Air cooling button(18) to switch off the air
cooling.
ð The SleepLED(23) goes out.
ð The device continues to run in ventilation mode.
Note
When Air cooling mode is activated, the air and
evaporation filter must not be removed, otherwise the
water from the filter will drip down into the device.
Ventilation
If the device is switched on, it automatically starts in the
operating mode Ventilation.
1. Press the Fan Speedbutton(14) to select another fan
speed.
ð If you selected another fan speed, the LED Fan Speed
LED(22) changes.
Air freshening
In air freshening mode, the fan speed increases and decreases
alternately to generate a pleasant, natural air stream.
Please proceed as follows to activate air freshening:
1. Press the Mode button(17) until the Air freshening
LED(24) is illuminated. The fan speed starts at stage1.
2. If you like to change the preset fan speed, press the Fan
Speed(14) button to set the desired fan speed.
ð The LED for the desired Fan Speed(22) will be
illuminated.
Night mode
In Night mode, the device generates an air current that is
adapted to your sleep habits.
1. Press the Mode button(17) twice on the device.
ð The night mode LED(19) is illuminated.
ð The fan speed starts at stage1.
2. If you like to change the preset fan speed, press the
Fan Speed(14) button to set the desired fan speed.
Setting the timer
The timer function for automatic switch-off can be set in all
operating modes.
The number of hours can be set from 1h to 9h.
Automatic switch-off
ü The device is switched on.
1. Press the Timer button(16) until the desired
HoursLED(21) is displayed.
ð The timer setting equals the desired number of hours.
ð The device switches off automatically after the set
number of hours has elapsed.
Notes regarding automatic switch-off:
Pressing the On/ Off button(13) deactivates the automatic
switch-off function.
Swing function
The swing function can be switched on in any operating mode if
required.
Behind the horizontal ventilation flaps, there are vertical air flaps
integrated in the device. By means of the swing function, these
air flaps are moved automatically and thus ensure continuous
air circulation.
1. Press the Swing button(15) to switch the swing function
on or off.
ð With activated swing function, the Swing
functionLED(20) is illuminated.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAE29 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAE29 in the language / languages: English as an attachment in your email.

The manual is 6,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAE29

Trotec PAE29 User Manual - German - 19 pages

Trotec PAE29 User Manual - Dutch - 18 pages

Trotec PAE29 User Manual - French - 19 pages

Trotec PAE29 User Manual - Italian - 18 pages

Trotec PAE29 User Manual - Italian - 18 pages

Trotec PAE29 User Manual - Polish - 19 pages

Trotec PAE29 User Manual - Turkish - 18 pages

Trotec PAE29 User Manual - Spanish - 18 pages

Trotec PAE29 User Manual - Finnish - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info