728000
14
Zoom out
Zoom in
Previous page
1/21
Next page
13 EN
air cooler PAE 26
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
The device does not start:
Check the power connection.
Check the power cable and mains plug for damages.
Check the on-site fusing.
Check whether the overheating protection has tripped (see
chapter Operation).
Wait for 10minutes before restarting the device. If the
device is not starting, have the electrics checked by a
specialist company or by Trotec.
The device has automatically switched itself off:
Keep the air inlet clear to prevent the motor from
overheating.
Check whether the overheating protection has tripped (see
chapter Operation).
The device works with reduced or no capacity:
Check the position of the horizontal ventilation flaps. They
should be opened to the maximum.
Check the air filter for dirt. If necessary, clean or replace
the air filter.
Check the minimum distance to walls or other objects.
Position the device a little more in the room's centre if
required.
The device is running, but there is no air cooling or pump
operation:
Check whether air cooling mode is activated. The Humidify
LED(21) should be illuminated.
Check the filling level of the water tank (see chapter Filling
the water tank). The Humidify LED(21) should not flash.
Check whether there are any objects blocking the pump
inlet. Make sure that the pump inlet is not blocked.
In case the pump does not operate despite a correctly filled
water tank and activated air cooling mode, the pump might
be defective. Please contact the customer service.
Water is leaking:
Check the device for leaks.
Check the water tank for tight fit.
The water tank cannot be inserted
Check whether the mechanism for lowering the pump was
released. If the pump can be seen in the lower area, the
water tank is being blocked.
Push the pump up until the switch for lowering the
pump can be seen.
The swing function is not working:
The swing function motor might be defective. Please
contact the customer service.
The device is loud or vibrates:
Check whether the device is set up in a stable and upright
position.
The device does not respond to the infrared remote control:
Check whether the distance between remote control and
device is too large and reduce it if necessary.
Make sure there are no obstacles, such as furniture or
walls, between the device and the remote control. Ensure
visual contact between device and remote control.
Check the charging status of the batteries and change
them if required.
If the batteries have only just been changed, check them
for correct polarity and change them if required.
Note
Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorized specialist electrical company or to
Trotec for repair.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAE26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAE26 in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAE26

Trotec PAE26 User Manual - German - 21 pages

Trotec PAE26 User Manual - Dutch - 22 pages

Trotec PAE26 User Manual - French - 22 pages

Trotec PAE26 User Manual - Italian - 22 pages

Trotec PAE26 User Manual - Polish - 22 pages

Trotec PAE26 User Manual - Turkish - 22 pages

Trotec PAE26 User Manual - Spanish - 22 pages

Trotec PAE26 User Manual - Finnish - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info