727657
11
Zoom out
Zoom in
Previous page
1/25
Next page
EN 11
local air conditioner PAC 3500 S / PAC 3800 S / PAC 3810 S
Setting the operating mode
cooling
dehumidification
ventilation
Cooling
In cooling mode the room will be cooled down to the desired
target temperature.
1. Press the MODE button(22) until the cooling LED(13) is
illuminated.
2. Repeatedly press the DOWN(21) or UP(20) button to
select the desired target temperature. The temperature
can be adjusted in increments of 1°C in a range between
16°C and 31°C.
ð The desired target temperature is indicated on the
segment display(14).
3. Press the SPEED button(19) to set the desired fan stage.
ð The fan speed LED(16) for the desired fan stage will be
illuminated.
ð The cooling LED(13) will be illuminated to indicate
cooling mode.
Dehumidification
In dehumidification mode the humidity level in the room is
reduced.
The temperature cannot be adjusted and the fan runs at the
lowest speed level.
Info
Remove the exhaust air hose during dehumidification,
otherwise the performance will be insufficient.
1. Press the MODE button(22) until the dehumidification
LED(13) is illuminated.
ð Dehumidification mode is selected.
ð The temperature and the fan speed (stage1) are preset
in this operating mode and cannot be changed.
ð The current room temperature is indicated on the
segment display(14).
Info
If the device is operated in a very humid environment,
the accumulating condensate must be discharged at
regular intervals (see chapter Condensate discharge).
Info
If you use the device for an extended period of time or
you don't want to empty the tank all the time, you can
connect a suitable hose to the hose connection(6).
Guide the other hose end to a suitable drain or
sufficiently dimensioned collection container. To
ensure that the condensate can run off, the hose must
not be kinked, nor should it have to overcome an uphill
incline towards the drain.
Ventilation
Info
Remove the exhaust air hose during ventilation.
In ventilation mode the room air is circulated, it will neither be
cooled nor dehumidified.
1. Press the MODE button(22) until the LED for
ventilation(13) lights up.
2. Press the SPEED button(19) to set the desired fan speed.
ð The LED for the selected fan speed(16) will be
illuminated.
Setting the timer
The timer has two modes of operation:
automatic switch-on upon expiry of a preset number of
hours
automatic switch-off upon expiry of a preset number of
hours
The timer can be programmed in increments of 1hour (1h to
24h).
The function can be set in all operating modes. It can be
activated both during operation and in standby mode.
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
ü The device is switched off.
1. Press the TIMER button(24).
ð The TIMER LED(23) is illuminated.
ð The number of hours flashes on the segment
display(14) for approx. 10s.
2. Repeatedly press the UP(20) or DOWN(21) button to
select the desired number of hours until automatic switch-
on.
3. Press the TIMER button(24) to confirm the setting.
ð The segment display(14) continuously indicates the
number of hours until automatic switch-on.
ð After the predefined time, the device switches itself on.
4. In order to delete the setting, press the TIMER button(24)
again.
ð The TIMER LED(23) goes out.
Notes regarding automatic switch-on:
If the device is disconnected from the power supply, all
settings for automatic switch-on are deleted.
Manually switching the device on disables the automatic
switch-on function.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAC3500S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAC3500S in the language / languages: English as an attachment in your email.

The manual is 7,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAC3500S

Trotec PAC3500S User Manual - German - 25 pages

Trotec PAC3500S User Manual - Dutch - 25 pages

Trotec PAC3500S User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info