689431
11
Zoom out
Zoom in
Previous page
1/21
Next page
EN 11
local air conditioner PAC 3500
Ventilation
Info
Remove the exhaust air hose during ventilation.
In ventilation mode the room air is circulated, but not cooled.
1. Press the Mode button(14) until the ventilation LED(15) is
illuminated.
ð Ventilation mode is selected.
ð The current room temperature is indicated on the
segment display(20).
2. Press the Fan Speed button(19) to set the desired fan
stage.
ð The fan speed LED(16) indicates the selected fan stage.
ð The ventilation LED(15) will be illuminated to indicate
ventilation mode.
Changing the unit °C / °F
The temperature in the segment display(20) can be indicated in
°C or °F.
Please proceed as follows to change the temperature unit:
1. Simultaneously press and hold the Increase value(17) and
Decrease value(18) buttons for approx. 3s.
ð The displayed temperature is converted to the other
unit.
Setting the timer
The timer has two modes of operation:
automatic switch-on upon expiry of a preset number of
hours.
automatic switch-off upon expiry of a preset number of
hours.
This setting can be made at the device or using the remote
control.
The function can be set in all operating modes and also during
stand-by.
The number of hours can be set in hourly increments (1h to
24h).
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
ü The device is switched off.
1. Press the Timer button(21) until the timer LED(13) is
illuminated.
2. Set the desired number of hours by use of the Decrease
value(17) and Increase value(18) buttons.
ð The number of hours will be indicated on the segment
display(20).
ð The timer setting equals the desired number of hours.
ð After the predefined time, the device switches itself on.
Notes regarding automatic switch-on:
If the device is disconnected from the power supply, all
settings for automatic switch-on are deleted.
Manually switching the device on disables the automatic
switch-on function.
If you select 0hours, the timer will be off.
Automatic switch-off
ü The device is switched on.
1. Press the Timer button(21) until the timer LED(13) is
illuminated.
2. Set the desired number of hours by use of the Decrease
value(17) and Increase value(18) buttons.
ð The number of hours will be indicated on the segment
display(20).
ð The timer setting equals the desired number of hours.
ð After the predefined time, the device switches itself off.
Notes regarding automatic switch-off:
Pressing the power button(11) deactivates the automatic
switch-off function.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch off the device.
Hold onto the mains plug while pulling the power cable out
of the mains socket.
Empty the condensation tray if necessary.
If necessary, remove the condensation drain hose and any
residual fluid from it.
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
The device does not start:
Check the power connection.
Check the power cable and mains plug for damages.
Check the on-site fusing.
Observe the operating temperature according to the
Technical data chapter.
The condensation tray may be full. Empty the condensation
tray if necessary. The water filling level LED(12) must not
be illuminated.
Wait for 10minutes before restarting the device. If the
device is not starting, have the electrics checked by a
specialist company or by Trotec.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAC3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAC3500 in the language / languages: English as an attachment in your email.

The manual is 9,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAC3500

Trotec PAC3500 User Manual - German - 22 pages

Trotec PAC3500 User Manual - Dutch - 23 pages

Trotec PAC3500 User Manual - French - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info