688812
15
Zoom out
Zoom in
Previous page
1/23
Next page
EN 15
local air conditioner PAC 2010 E / PAC 2610 E
Key lock (remote control only)
The function can be activated via the remote control both during
operation and in standby mode.
The key lock applies to the remote control only – the control
panel at the device is not affected and can be used nonetheless.
1. Simultaneously press the plus/ minus buttons(27, 32) on
the remote control.
ð The key lock is activated. The remote control cannot
send signals to the device.
ð The LOCK indication can be seen on the remote
control's display(25).
2. Simultaneously press the plus/ minus buttons(27, 32)
once more.
ð The key lock is deactivated.
ð The LOCK indication on the remote control's display(25)
disappears.
Switching the control panel illumination on and off
The illumination of the control panel can be switched on or off
via the remote control both during operation and in standby
mode.
1. Simultaneously press the plus button(27) and the
FAN button(31) on the remote control for 3s.
ð The control panel illumination will be switched off.
ð The device continues to run with the selected settings.
2. Simultaneously press the plus button(27) and the
FAN button(31) again for 3s.
ð The control panel illumination will be switched back on.
Self-cleaning function / Internal drying
This function serves to dry the interior of the device in order to
prevent the formation of mould or similar inside the device due
to residual moisture.
The self-cleaning function should be used if the device is not
operated or is stored for a longer period of time.
This function can be activated via the remote control during
cooling and dehumidification.
The fan continues to run at low speed for a while after the
device has been switched off.
Please proceed as follows to activate the self-cleaning function/
internal drying:
1. Select the operating mode cooling or dehumidification.
2. Press the X-FAN button(28) on the remote control.
ð The X-FAN indication can be seen on the remote
control's display(25).
3. Press the ON/OFF button(33) to switch the device off.
ð The fan continues to run at low speed for a while. Then
the fan switches off as well.
4. You can deactivate the self-cleaning function/ internal
drying at any time by pressing the X-FAN button(28)
again.
Memory function
After a power failure during operation the device will
automatically be switched back on. The chosen operating mode
settings will be saved, a possibly programmed timer will not.
All the chosen settings (incl. timer) remain saved on the remote
control. As soon as the device receives an input from the remote
control, the settings will be transmitted from the remote control
to the device.
The compressor may start up with a delay of 3min, as it is
provided with an internal protection against direct restart.
Automatic defrost
At low ambient temperatures, ice may form at the evaporator.
The device will then carry out an automatic defrost.
The compressor switches off and the fan keeps running until
defrosting is completed. The duration of the defrost process can
vary.
Do not switch the device off during automatic defrost. Do not
remove the mains plug from the mains socket.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Switch off the device.
Hold onto the mains plug while pulling the power cable out
of the mains socket.
Empty the condensation tray if necessary.
If necessary, remove the condensation drain hose and any
residual fluid from it.
If necessary, carry out self-cleaning (see chapter
Self-cleaning function).
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAC2010E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAC2010E in the language / languages: English as an attachment in your email.

The manual is 10,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAC2010E

Trotec PAC2010E User Manual - German - 23 pages

Trotec PAC2010E User Manual - Dutch - 23 pages

Trotec PAC2010E User Manual - French - 23 pages

Trotec PAC2010E User Manual - Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info