688812
12
Zoom out
Zoom in
Previous page
1/23
Next page
12 EN
local air conditioner PAC 2010 E / PAC 2610 E
Operation
Avoid open doors and windows.
Operating elements
23
12
13
14
15
16
18
17
19
20
21
22
No. Designation Function
12 Minus arrow button For decreasing the target
temperature (16°C to 30°C) or
the number of hours of the timer
(0.5h to 24h)
13 Segment display Indication of the target
temperature in cooling mode
Indication of the number of hours
during timer programming
Indication of the error code, see
chapter Errors and faults
°C / °F indication
14 Plus arrow button For increasing the target
temperature (16°C to 30°C) or
the number of hours of the timer
(0.5h to 24h)
15 Operating mode
LED
Indicates the selected operating
mode:
Cool= cooling
Dry= dehumidification
Fan= ventilation
16 Mode button For selecting the operating mode:
cooling
dehumidification
ventilation
17 Timer LED Illuminated when the timer is
activated.
18 Timer button For switching the timer function
on and off: in increments of
0.5hours (0.5h to 10h) or in
increments of 1hour (11h to
24h)
19 On/Off button Power button: For switching the
device on and off
No. Designation Function
20 Sleep button For switching night mode on and
off
21 Sleep LED Illuminated when night mode is
activated.
22 Fan button For setting the fan stage:
Low = lowest level
Med = medium level
High = highest level
Auto = automatic speed
regulation
23 Fan stage LED Indicates the current fan stage.
Info
An acoustic signal is emitted each time a setting is
activated.
Switching the device on
1. Allow the device to rest for a time.
2. Once you have completely installed the device as
described in the Start-up chapter, you can switch it on.
3. Press the On/Off button(19).
ð The device switches on.
4. Select the desired operating mode.
The device switches off automatically when the condensation
tank is full. H8 is displayed on the segment display(13).
Setting the operating mode
The device has the following operating modes:
cooling
dehumidification
ventilation
Cooling
In cooling mode the room will be cooled down to a certain
preselected temperature.
Upon reaching the target temperature, the device switches to
standby, i.e. the fan keeps running at the preselected level, but
the device does not resume cooling until the preselected value
is exceeded again.
1. Use the Mode button(16) to select cooling mode.
ð The operating mode LED Cool(15) is illuminated.
2. Select the desired target temperature by use of the arrow
buttons(12 or 14). The temperature can be adjusted in
increments of 1°C in a range between 16°C and 30°C.
ð The desired target temperature is indicated on the
segment display(13).
3. Select the desired fan stage by use of the Fan button(22).
ð The fan stage LED(23) indicates the desired fan stage.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec PAC2010E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec PAC2010E in the language / languages: English as an attachment in your email.

The manual is 10,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec PAC2010E

Trotec PAC2010E User Manual - German - 23 pages

Trotec PAC2010E User Manual - Dutch - 23 pages

Trotec PAC2010E User Manual - French - 23 pages

Trotec PAC2010E User Manual - Spanish - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info