727848
11
Zoom out
Zoom in
Previous page
1/15
Next page
EN 11
infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200
Remote control
The device settings can only be made using the remote control
included in the scope of delivery.
Therefore, keep the remote control in a safe place, otherwise
the device can no longer be operated. Should you still be unable
to find the remote control, you can reorder a new one from
Trotec.
TIMERP3
P2P1
22
23
27
26
24
25
No. Designation Meaning
22 Transmitter Sends signals to the device.
23 Power button Switching the device on and off
24 P2 button Selecting heating capacity level2
25 TIMER button Timer function
Automatic switch-off in increments of
1hour up to 24hours
26 P3 button Selecting heating capacity level3
27 P1 button Selecting heating capacity level1
The heating capacity in the individual heating levels is 33%
(level1), 66% (level2) and 100% (level3):
Heating
capacity
IRD 1200 IRD 1800 IRD 2400 IRD 3200
P1 = level1 400 W 600 W 800 W 1070 W
P2 = level2 800 W 1200 W 1600 W 2140 W
P3 = level3 1200 W 1800 W 2400 W 3200 W
Info
If you switch off the device via the remote control, the
device will be set to standby mode. If standby
operation is not required, you can switch the device off
via the on/off switch(2).
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Set the on/off switch(2) on the device to I.
ð The operating light(19) flashes.
ð The device is now in standby mode.
2. Press the Power button(23) on the remote control.
ð The segment display(21) indicates P0.
ð The operating light(19) is illuminated.
ð The device is switched on, but does not heat yet.
3. Press the corresponding button(24, 26, 27) on the remote
control to set the desired heating level.
ð The device heats.
ð The selected heating level flashes in the segment
display(21).
ð The operating light(19) is permanently illuminated
during operation.
Setting the timer
The timer allows you to program an automatic switch-off time in
increments of 1hour up to 24hours at any heating level.
You can change the heating level during timer programming.
The timer programming remains activated.
ü The device is switched on.
ü The heating level is set.
1. Press the TIMER button(25) several times to set the
desired number of hours until automatic switch-off.
ð The timer LED(20) is illuminated.
ð The segment display(21) indicates the number of hours
until automatic switch-off.
ð The timer has been programmed and the device will
switch off after the predefined time.
2. In order to delete the setting, select 00 hours using the
TIMER button(25).
ð The segment display(21) indicates the number of hours
00.
ð The timer has been deleted.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec IRD3200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec IRD3200 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec IRD3200

Trotec IRD3200 User Manual - German - 15 pages

Trotec IRD3200 User Manual - Dutch - 16 pages

Trotec IRD3200 User Manual - French - 14 pages

Trotec IRD3200 User Manual - Italian - 16 pages

Trotec IRD3200 User Manual - Polish - 16 pages

Trotec IRD3200 User Manual - Turkish - 16 pages

Trotec IRD3200 User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info