727847
12
Zoom out
Zoom in
Previous page
1/15
Next page
12 EN
infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
Info
If you switch off the device via the remote control, the
device will be set to standby mode. If standby
operation is not required, you can switch the device off
via the on/off switch(2).
Switch off the device by pressing the Power button(23) on
the remote control. The operating light flashes. Then set
the on/off switch(2) on the device to 0.
Allow the device to cool down completely.
Hold onto the mains plug while pulling the power cable out
of the mains socket.
Clean the device according to the Maintenance chapter.
Store the device according to the Storage chapter.
Errors and faults
Warning of electrical voltage
Tasks which require the housing to be opened
must only be carried out by authorised specialist
companies or by Trotec.
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
Noise generation (clicking) during switch-on or cooling:
This is not a fault. The device's metal parts expand when
heated and contract when cooling, and thus generate
noise. This is a perfectly normal process. No measures are
required.
The device does not start:
Check the power connection.
Check the power cable and mains plug for damages.
Check the on-site fusing.
Wait for 10minutes before restarting the device. If the
device is not starting, have the electrics checked by a
specialist company or by Trotec.
The device does not emit heat:
The heating rod might be defective. Have a defective
heating rod replaced by a specialist electrical company.
Check the heating level on the segment display. If P0 is
displayed, the device is running in standby mode.
Switch the device on by selecting another heating level
between P1 and P3.
Check the on/off switch. If the on/off switch is set to the0
position, the device is switched off.
Switch the device on.
Check the operating light. If the operating light flashes red,
the device is running in standby mode.
Switch on the device by selecting a heating level via the
remote control.
Contact a specialist electrical company.
The heat output is low:
Strong wind or cold temperatures in outdoor areas can
impair the device's heat output.
Check whether the device is installed in the correct
position. The device may be installed too high or the
inclination angle may be incorrect.
The device is undersized for the area to be heated.
The heating rod might be defective. Have a defective
heating rod replaced by a specialist electrical company.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec IRD2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec IRD2400 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec IRD2400

Trotec IRD2400 User Manual - German - 15 pages

Trotec IRD2400 User Manual - Dutch - 16 pages

Trotec IRD2400 User Manual - French - 14 pages

Trotec IRD2400 User Manual - Italian - 16 pages

Trotec IRD2400 User Manual - Polish - 16 pages

Trotec IRD2400 User Manual - Turkish - 16 pages

Trotec IRD2400 User Manual - Spanish - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info