756396
12
Zoom out
Zoom in
Previous page
1/28
Next page
11 EN
Operating manual – thermal imaging camera IC085LV / IC125LV
Data transfer via USB
You can either access and read out the microSD memory card
inserted in the device using a micro USB data cable, or transfer
the data to the software (optional PRO version) in real time and
thus record fully radiometric infrared videos.
To do so, first select the desired transmission mode in the
settings:
USB Mode (data memory access)
Trans. (real-time data transmission to software)
1. Press the C button (25).
ðThe main menu is displayed.
2. Select the Settings menu.
3. Select the System menu.
4. Select the Control menu.
5. Press the USB Mode button.
6. Swipe to select the desired transmission mode.
7. Leave the Settings menu.
8. Connect the supplied micro USB data cable to the device.
9. Connect the data cable to a PC or notebook.
Info
You also have to start data transmission in the
software (optional PRO version) in order to connect the
device.
To transmit fully radiometric real-time IR videos to your PC
using a micro USB data cable (only possible in combination with
the optionally available IC report PRO software), please proceed
as follows:
1. Connect the optionally available dongle of the IC report
analysis software PRO version to a free USB port of your
PC. Without the dongle, the extension of the USB interface
in the analysis software is locked.
2. Open the IC report software and activate the Trans.
transmission mode at the camera.
3. Connect the PC to the camera using the supplied micro
USB cable.
4. If the IC report analysis software was properly installed
beforehand, the PC's operating system will automatically
identify the connected camera and install all necessary
drivers.
5. After the drivers have been successfully installed, the
camera will be detected as mass storage device every
time it is connected to the PC.
6. In the menu of the analysis software select the item
Monitoring – Connect USB or click directly onto the USB
symbol.
7. Select the type of camera you want to connect to your
computer in the submenu that opens.
8. Now enter the path of the location where the calibration
table (dataload.bin file) is to be saved on your computer.
9. Select the applicable temperature range.
10. Confirm with OK.
ðThe live image of the camera appears in the software's
analysis window.
Info
The calibration table that corresponds to the camera is
bound to the serial number and only valid for the
respective device connected.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec IC125LV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec IC125LV in the language / languages: English as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec IC125LV

Trotec IC125LV User Manual - German - 28 pages

Trotec IC125LV User Manual - Dutch - 28 pages

Trotec IC125LV User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info