756395
13
Zoom out
Zoom in
Previous page
1/28
Next page
EN 12
Operating manual – thermal imaging camera IC085LV / IC125LV
Switching the laser pointer on or off
Please proceed as follows to switch the laser pointer on or off:
Warning of laser radiation
Laser class2, P max.: < 1mW, λ: 650nm,
EN 60825-1:2014
Do not look directly into the laser beam or the opening
from which it emerges.
Never point the laser beam at people, animals or
reflective surfaces. Even brief eye contact can lead to
eye damage.
Examining the laser output aperture by use of optical
instruments (e.g. magnifying glass, magnifiers and the
like) entails the risk of eye damage.
When working with a laser of class2, observe the
national regulations on wearing eye protection.
1. Press the C button (25).
ðThe main menu is displayed.
2. Select the Settings menu.
3. Select the System menu.
4. Select the Control option.
5. Activate the laser permanently by sliding the selector
switch to the right.
ðThe laser pointer is switched and permanently
illuminated.
ðThe Laser selector switch is highlighted in blue.
6. Deactivate the laser by sliding the selector switch to the
left.
Info
You can also assign this function to the multifunction
button. Further information on the multifunction button
is provided in the chapter Configuring the multifunction
button.
Using the AV port
You can connect the device to a screen via an AV cable. The
image can be transmitted in PAL or NTSC format.
1. Select the Settings menu.
2. Select the System menu.
3. Select the Control menu.
4. For the option TV-Out Mode select the desired format PAL
or NTSC.
5. Enable the TV-Out option by sliding the selector switch to
the right.
ðThe TV-Out selector switch is highlighted in blue.
ðThe TV output is activated.
6. Open the sealing cap at the AV output(5).
7. Connect the supplied or a suitable AV cable to the device
and to the screen.
Attaching the lens hood
If required, you can attach the lens hood in order to shield the
display from the ambient light.
Please proceed as follows:
1. Slide the lens hood onto the opened display from the top.
Switching the device off
1. Remove the lens hood if you have attached it.
2. Press the Power button(17).
3. Confirm the prompt with OK.
4. Close the display.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec IC085LV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec IC085LV in the language / languages: English as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec IC085LV

Trotec IC085LV User Manual - German - 28 pages

Trotec IC085LV User Manual - Dutch - 28 pages

Trotec IC085LV User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info