753329
5
Zoom out
Zoom in
Previous page
1/16
Next page
EN 4
Operating manual – heat gun HyStream 2100
General Power Tool Safety Warnings – Power tool
use and care
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source and / or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
General Power Tool Safety Warnings – Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Device-specific safety warnings for heat guns
Negligent handling of the device may result in a fire.
Proceed with caution when using the power tool near
combustible materials.
Do not point the device at the same spot over a longer
period of time.
Do not use the device in a potentially explosive
atmosphere.
The heat can reach combustible materials which are
covered.
After use put down the power tool in an upright position
on the provided stand with the air outlet pointing
upward.
Do not leave the power tool unattended while in
operation.
Do not look directly into the nozzle opening at the air
outlet.
Never direct the hot air current at people or animals.
Never direct the hot air directly at a window or other glass
surfaces.
Never obstruct the hot air current by blocking or covering
the air outlet.
Do not use the power tool in wet surroundings or in areas
with an increased humidity level.
Do not use the suspension eye on the power cable as
transport aid.
Keep a sufficient distance between the air outlet and the
workpiece or the surface to be processed. An
accumulation of air can lead to overheating of the power
tool.
Allow the power tool to cool down sufficiently before
storing it away. The power tool, especially the air outlet, is
still very hot and can thus cause damage.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec HyStream 2100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec HyStream 2100 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec HyStream 2100

Trotec HyStream 2100 User Manual - German - 17 pages

Trotec HyStream 2100 User Manual - Dutch - 16 pages

Trotec HyStream 2100 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info