580108
24
Zoom out
Zoom in
Previous page
1/64
Next page
B - 9 Operating manual – Condenser dryer DH 95 S GB
The accurate functionality of the device was tested
during production a number of times. However, if
functionality faults do occur, then check the device
according to the following list.
The device does not start:
• Check the mains power (230 V/1~/50 Hz).
• Check the mains plug for damages.
If the fault indicator for the condensation pump
lights up or a beep is emitted, have the error re-
paired by a specialist company for cooling and air-
conditioning or by TROTEC
®
.
• Have the electrics checked by a specialist compa-
ny for cooling and air-conditioning or by TROTEC
®
.
The device runs but forms no condensation:
Check the condensation drain hose is positioned
correctly.
Check that the condensation pump functions prop-
erly. Check for abnormal vibrations and sounds.
Remove external dirt.
Check the room temperature. Check the device's
permissible working range complies with the tech-
nical data.
Ensure that the relative humidity complies with the
technical data.
Check that the selected humidity is realistic. The
humidity in the room must be above the selected
range. Reduce the selected humidity by pressing
the "Arrow down" button (15), if necessary.
Check the air filter is not dirty. If necessary, clean
or replace the air filter.
From the outside, check the condenser and the
condensation pump are not dirty (see chapter
"Maintenance"). If the inside of the device is dirty,
have it cleaned by a specialist company for cooling
and air-conditioning or by TROTEC
®
.
The device is loud or vibrates; condensation leaks:
Check whether the device is standing upright and
on an even surface.
The device gets very warm, is loud or is losing
performance:
• Check the air inlets and air filter are not dirty. Re-
move external dirt.
Check the inside of the device and especially the
fan, the fan housing, the evaporator, the
condenser and the condensation pump for
external dirt (see "Maintenance" chapter). If the
inside of the device is dirty, have it cleaned by a
specialist company for cooling and air-
conditioning or by TROTEC
®
.
Possible error numbers
Does your device still not operate correctly after
these checks? Is there an error number shown in
the display for your device?
Bring the device to a specialist company for cooling
and air-conditioning or to TROTEC
®
for repairs.
Errors and faults
Error numbers Meaning
E1 There is not enough refrigerant available.
E2 The temperature sensor reports an error.
E3 The sensor for measuring the humidity reports
an error.
E4 The refrigerant flow line sensor reports an error.
E5 The sensor for measuring electric current reports
an error (rotating field).
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec DH 95 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec DH 95 S in the language / languages: English, German, French, Turkish as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info