756398
5
Zoom out
Zoom in
Previous page
1/7
Next page
EN 5
insertion thermometer BT20
Operation
Start-up
üRemove the protective cover(3) before you use the device.
1. Press the ON/OFF button(5).
ðThe display will be switched on and the device ready for
operation.
2. Put the insertion rod at least halfway into the material to be
tested.
ðThe current temperature will be indicated on the
display(4).
The device switches off after approx. 20minutes so as to save
the batteries.
Switching between °C and °F indication
Press the °C/°Fbutton(7) to change the temperature unit.
Holding the temperature value
1. Press the HOLD button(6) once. HOLD appears on the
display.
ðThe previously measured temperature value will be held
on the display.
2. To indicate the current temperature, press the
HOLDbutton(6) three times.
Indication of maximum and minimum value
1. To call up the maximum temperature, press the
HOLD button(6) twice.
ðMAX appears on the display.
2. Press the HOLD button(6) again to call up the minimum
temperature.
ðMIN appears on the display.
3. Press the HOLD button(6) again to display the currently
temperature value.
Switch-off
Press the ON/OFF button(5). The device is switched off.
Put the protective cover back onto the device.
Maintenance and repair
Battery change
A battery change is required, when the displayed values are
difficult to read or the device can no longer be switched on.
In order to exchange the battery, remove the housing's
protective cover.
Open the cover of the battery compartment(8). Remove the old
battery. Insert a new battery.
Cleaning
Clean the device with a soft, damp and lint-free cloth. Make
sure that no moisture enters the housing. Do not use any
sprays, solvents, alcohol-based cleaning agents or abrasive
cleaners, but only clean water to moisten the cloth.
The device and its components are not dishwasher-safe.
Repair
Do not modify the device or install any spare parts. For repairs
or device testing, contact the manufacturer.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec BT20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec BT20 in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec BT20

Trotec BT20 User Manual - German - 7 pages

Trotec BT20 User Manual - Dutch - 7 pages

Trotec BT20 User Manual - French - 7 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info