756400
6
Zoom out
Zoom in
Previous page
1/8
Next page
6 EN
food thermometer BP2F
Temperature measurement with temperature probe
Caution
Risk of contamination of product being measured!
Disinfect the probe before using it in food. Use a
disinfectant suitable for stainless steel and food.
1. Fold out the temperature probe(7).
2. Insert the temperature probe into the material to be
measured by approx. 1 cm.
ðThe currently measured value is indicated.
ðThe probe temperature indication (15) appears on the
display.
Note
The temperature probe is not suitable as an ice pick
and should never be pricked into frozen objects
forcefully to prevent damages to the device.
Changing the unit °C / °F indication
The default setting for the temperature unit is °C.
Please proceed as follows to change the temperature unit at the
device:
1. Press the SET button (6) five times until the °C/°F
indication flashes.
2. Press the Scan(4) or LED(5) button to set the desired unit.
3. Press the SET button(6) again to save the setting.
Setting the alarm limits
1. Press the SET button(6) once until the upper alarm limit
indication(16) flashes.
2. Press the Scan(4) or LED(5) button to set the upper alarm
limit.
3. Press the SET button(6) again.
ðON or OFF will flash in the measurement value
indication(13).
ðThe indication for the upper alarm limit (16) flashes.
4. Press the Scan(4) or LED(5) button to enable or disable
the upper alarm limit.
ðON indicates that the upper alarm threshold is enabled.
ðOFF indicates that the upper alarm threshold is
disabled.
5. Press the SET button(6) again.
ðThe indication for the lower alarm limit (17) flashes.
6. Press the Scan(4) or LED(5) button to set the lower alarm
limit.
ðON or OFF will flash in the measurement value
indication(13).
ðThe indication for the lower alarm limit (17) flashes.
7. Press the Scan(4) or LED(5) button to enable or disable
the lower alarm limit.
ðON indicates that the lower alarm threshold is enabled.
ðOFF indicates that the lower alarm threshold is disabled.
8. Press the SET button(6) twice to exit the settings.
ðThe alarm limits and the settings are saved.
Settings overview
SET button Function
Press 1 x Set upper alarm limit
Press 2 x Enable or disable upper alarm limit
Press 3 x Set lower alarm limit
Press 4 x Enable or disable lower alarm limit
Press 5 x Set unit °C or °F
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec BP2F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec BP2F in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec BP2F

Trotec BP2F User Manual - German - 8 pages

Trotec BP2F User Manual - Dutch - 8 pages

Trotec BP2F User Manual - French - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info