756388
9
Zoom out
Zoom in
Previous page
1/13
Next page
EN 9
laser distance measuring device BD21 / BD26
Indirect height measurement (Pythagoras)
Using this method the length of an unknown straight-line
segment can be determined via the Pythagorean Theorem. This
method is suitable for e.g. height measurements.
The measurement result is calculated by determining the
distance A and the inclination angle (standard setting) or by
determining the distances A and B.
A
B
Measurement with distance A and inclination angle:
1. Briefly press the Button for indirect measurements(9) one
time.
ðThe symbol for indirect measurements appears on
the display.
ðThe inclination angle is displayed in the third line of the
upper measurement value display on the right-hand
side (see example 33.0°).
ðThe bar with number 1 (hypotenuse) flashes.
H
29
25
28
2. Aim the device at the highest point(A) and briefly press the
Switch-on/measurement button(7) once to perform a
measurement. Make sure to hold the device as steady as
possible and place it level on the ground with the two rear
edges. The position at the two rear edges must not be
changed during the measurements!
ðBoth measurement and calculation are effected.
ðThe horizontal (1st line) and vertical (2nd line) distance
values are indicated in the upper measurement value
display.
ðThe line segment to be determined is displayed as
result in the lower measurement value display(25).
Measurement with distances A and B:
1. Briefly press the Button for indirect measurements(9) one
time.
ðThe symbol for indirect measurements appears on
the display.
ðThe bar with number 1 (hypotenuse) flashes.
2. Press the Inclination button(15) for a long time.
ðThere will be no angle displayed.
29
25
28
3. First, aim the device at the highest point(A) and briefly
press the Switch-on/measurement button(7) once to
perform a measurement. Make sure to hold the device as
steady as possible and place it level on the ground with the
two rear edges. The position at the two rear edges must
not be changed during the measurements!
ðThe length of the line segment will be indicated in the
1stline of the upper measurement value display.
4. Align the device horizontally (point B) and briefly press the
Switch-on/measurement button(7) one time to measure
the horizontal distance.
ðThe second measured value will be indicated in the
second line of the upper measurement value display.
ðThe line segment to be determined is displayed as
result in the lower measurement value display(25).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trotec BD26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trotec BD26 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trotec BD26

Trotec BD26 User Manual - German - 13 pages

Trotec BD26 User Manual - Dutch - 13 pages

Trotec BD26 User Manual - French - 13 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info