Manual Tronic TSW 300 A1 IAN 93506 (page 25 of 33) (English, German, Dutch)

737170

Zoom out

Zoom in

1/33

- 22 -

Introduction

Congratulations on the purchase of your new appli-

ance. You have clearly decided in favour of a quality

product. These operating instructions are a part of

this product. They contain important information in

regard to safety, use and disposal. Before using the

product, familiarise yourself with all of these opera-

ting and safety instructions. Use the product only as

described and only for the specified areas of appli-

cation. Retain these instructions for future reference.

In addition, pass these documents on, together with

the product, to any future owner.

Intended Use

The device is intended for connection to a 12 V

vehicle power socket or a car battery and an output

of 220 - 240 V AC, for the connection of electrical

devices with Euro plug and a power consumption

of up to 300 Watts. In addition, battery-powered

devices with a USB interface e.g. MP3 Players, can

be charged from the USB port.

The device is not intended for commercial or

industrial purposes.

No guarantee claims will be granted for damage

resulting from improper use!

Attention!

Sensitive electronic devices should not be ope-

rated with the power inverter since the output

voltage is not sufficiently constant for these

devices.

Safety information

• This device is not intended for use by individuals

(including children) with restricted physical, physio-

logical or intellectual abilities or deficiences in

experience and/or knowledge unless they are

supervised by a person responsible for their safety

or receive from this person instruction in how the

device is to be used. Children should be supervised

to ensure that they do not play with the device.

• To avoid dangers remove the power inverter from

the vehicle receptacle and/or the connection ter-

minals from the automotive battery after each

use and before every cleaning.

• Only connect the power inverter to the automotive

battery when the engine is switched off! The

possibility of injury exists from rotating parts!

• Check the device and all parts for visible damage.

The safety concept of the device can only function

properly when it is in perfect condition.

• The power inverter must always be easily accessible

so that, in case of emergency, it can be quickly

disconnected from the power supply system.

Risk of electrical shocks.

• Connect the power inverter only to a 12 V auto-

motive battery/vehicle receptacle. Connecting

the device to a 24 V supply could damage it.

• When connecting the power inverter via the 12 V

vehicle plug make sure that the polarity of the

vehicle plug matches the polarity of the in vehicle

receptacle. The vehicle socket must have an inter-

nal positive pole, that is to say that the positive pole

of a vehicle battery cannot be connected to the

chassis of the vehicle.

• Check before connecting the power inverter that

the vehicle receptacle is sufficiently secured. This

safeguard may not in any way be circumvented

or changed.

• Use the supplied connecting cable only.

• Arrange for defective plugs, connection terminals or

cable to be replaced at once by qualified techni-

cians or our Customer Service Department.

• Get customer service to repair or replace connecting

cables and/or devices that are not functioning

properly or have been damaged.

• You may not open the casing or repair the device

yourself. Should you do so, the safety of the

device may be compromised and the warranty

becomes void.

• NEVER submerse the device in water.

Wipe it only with a slightly damp cloth.

IB_93506_TSW300A1_GB_LB1.qxd 30.10.2013 14:18 Uhr Seite 22

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tronic TSW 300 A1 IAN 93506 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tronic TSW 300 A1 IAN 93506 Manual

Product: