647777
7
Zoom out
Zoom in
Previous page
1/41
Next page
- 5 -
The various indicators have the following meanings:
- The LED blinks red and green every second
(Not for 9V Block batteries):
The rechargeable batteries are alternately char-
ged and discharged.. (Refresh-Function: Older
batteries or those that have been stored for a long
period will be refreshed.).
- The LED flashes red and green in a 1/2 second
rhythm (not applicable to 9V rechargeable
batteries):
If the rechargeable batteries do not have to be
refreshed (refresh function), conditional on the
length of storage or the age, the following process
takes place: the rechargeable batteries are di-
scharged to minimize the memory effect.
- The LED glows red constantly:
The rechargeable batteries are charged with the
maximum charge current.
- The LED glows green constantly:
The batteries are fully charged and the Battery
Charger has switched over to trickle charge.
Warning!
The batteries could become hot during charging.
NEVER touch hot batteries! There is a danger of
being burnt!
Remove the power cable of the Battery Charger
from the plug socket and allow the batteries to
cool down.
Afterwards you can remove the charged batteries
from the Battery Charger.
Calculating the average charging time
Dependant on the type, age and remaining battery
charge, hence the charging process takes different
lengths of time. The average charging times can be
calculated using the following formula.
Note, however, that the times calculated are only
indicative.
Current time (Min.) =
Capacity of t
he batter
y (mAh) x 1,5 x 60
Charging current of the appliance (mA)
Automatic charging control/
Retention charging
This Battery Charger controls the charging time for
rechargable batteries of the types Ni-Cd and Ni-MH
separately. This control is based on the –Δ U
(„minus Delta U“) calculation.
In mathematics, with Delta Δ differences are
described.
„Minus Delta U“ in this case means a negative
voltage difference.
This charge identification makes itself useful in the
following effects:
Should a battery be charged with a constant current,
its voltage rises continuously. When the battery is
full, its voltage reaches a maximum and falls lightly
with further current flow. This light fall in voltage is
recognised by the charging electronics and the
charge process is terminated. The Battery Charger
automatically switches to „Retention charging“.
This means that the batteries are no longer being
charged with continuous power, but with short power
impulses instead. This counteracts the process of
self-discharge, thus retaining the batteries in a fully
charged condition.
Timer control
In addition, this Battery Charger is fitted with a timer
control, which after 15 hours automatically switches
over to trickle charge. This serves as additional
protection against overcharging should the charge
terminating device not respond, due to a possibly
defective battery.
IB_68599_TLG500B1_LB3.qxd 18.10.2011 14:28 Uhr Seite 5
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tronic TLG 500 B1 - IAN 68599 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tronic TLG 500 B1 - IAN 68599 in the language / languages: English, German, Danish, Swedish, Finnish as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tronic TLG 500 B1 - IAN 68599

Tronic TLG 500 B1 - IAN 68599 User Manual - German, Dutch, French, Italian - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info