464868
6
Zoom out
Zoom in
Previous page
1/10
Next page
6
d) Charging batteries
If you have inserted the batteries the right way up,
as described at paragraph a) ...
move the switch to the center, to the position with
the "Charge" symbol, and ...
connect the power plug to the power socket.
If all batteries have been placed correctly, the charge
indicator LED lights up at each charging slot.
Danger! If a charge indicator LED is not lit, even though
the battery has been correctly inserted, then the battery is
faulty. Do not, in any circumstances, attempt to charge
a faulty battery. A faulty battery can overheat and then
explode.
Only charge with the cover closed. This will provide
sufficient protection against flying battery parts in the
event of an explosion due to overheating.
c) Discharge Ni-Cd batteries first
Ni-Cd batteries that are not fully discharged should be
discharged first, to avoid the possibility of "memory
effects".
If you have inserted up to 4 Ni-Cd batteries,
move the switch to the far right, to the position
with the "Discharge" symbol.
Allow the Ni-Cd batteries to discharge until the
test indicator light is barely lit, meanwhile testing
the batteries a few times. For this, push the switch all
the way to the left, into the position with the symbol
„Test“.
Important: Do not allow Ni-Cd batteries to become
completely discharged, as this may ruin them. Therefore,
do not allow the batteries to discharge until the test
indicator light goes off completely. The discharge function
in the four charging shafts is available for 1.2 V batteries
only – not for 9V single block batteries.
KH967_IB_AkkuChar_neu_UK.qxd 21.04.2006 10:38 Uhr Seite 6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tronic KH 967 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tronic KH 967 in the language / languages: English as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tronic KH 967

Tronic KH 967 User Manual - German - 50 pages

Tronic KH 967 User Manual - Dutch - 26 pages

Tronic KH 967 User Manual - Danish - 50 pages

Tronic KH 967 User Manual - French, Italian - 26 pages

Tronic KH 967 User Manual - Swedish, Norwegian, Finnish - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info