464846
42
Zoom out
Zoom in
Previous page
1/62
Next page
- 40 -
Do not operate the Energy Station in the im-
mediate vicinity of sources of heat, such as an oven,
hot air blowers (in a vehicle: close to heating
vents) and similar appliances! Heat effects could
lead to the equipment overheating and to the
melting of plastic parts, whereby the Energy
Station could be irreparably damaged!
If it is overheated, the Energy Station could
be irreparably damaged and the risk of
a fire exists!
This appliance must not be placed in the im-
mediate vicinity of flammable materials,
for example curtains, inflammable liquids etc.
Do not place any open sources of fire,
like candles, on the appliance.
Injury hazard!
Keep children away from the connecting cable
and the appliance. Children frequently under-
estimate the dangers of electrical appliances.
Ensure that the appliance stands with a safe and
secure positioning.
Do not operate the appliance if it has sustained
a fall or is damaged. Arrange for the appliance
to be checked and, if necessary, repaired by
qualified technicians.
Start-up
The Energy Station is supplied with a low-level pre-
charged battery. Prior to initial usage it must therefore
be charged.
Attention!
The battery can lose considerable capacity should
you use the Energy Station without fully charging it
beforehand!
Before taking the appliance into use, check to
ensure that the Energy Station, the connection
cables
and the power supply unit are in
a defect-free condition.
Danger!
NEVER use a damaged connection cable. Risk of
short circuit!
Charging with the mains power plug
Attention: Explosive Gas
Avoid flames and sparks. During charging, ensure
that there is sufficient ventilation.
1. Insert the appliance plug of the power supply
unit
in the charging socket DC-INPUT w at
the back of the appliance.
2. Connect the power supply unit
to a mains
power socket. The mains voltage must conform
with the specifications on the ratings plate of the
power supply unit.
3. Place the main switch 2 at the front of the appli-
ance to the “CHA” position. The Energy Station is
now being charged.
4. While the Energy Station is charging, the red LED
“On” 6 in the field CHARGE will be illuminated.
5. When the battery is nearly fully charged, the
green LED “Full” 6 will start to be faintly illumi-
nated. As soon as it is fully illuminated you can
remove the power supply unit
. The red LED
"On" 6 continues to glow until you place the
main switch 2 in the position "OFF".
Charging with the vehicle adapter
You can also charge the Energy Station by con-
necting the supplied vehicle adapter
to the
12V on-board voltage system of a motor vehicle or
sports boat:
1. First insert the appliance plug of the 12V vehicle
adapter
in the charging socket w at the rear
of the appliance.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tronic KH 3002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tronic KH 3002 in the language / languages: Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tronic KH 3002

Tronic KH 3002 User Manual - English - 14 pages

Tronic KH 3002 User Manual - German, Dutch, French - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info