651350
130
Zoom out
Zoom in
Previous page
1/312
Next page
Operation Panel
4-70
2 Press [OK]. The TCP/IP Settings menu screen appears.
TCP/IP (Enable/Disable TCP/IP)
This specified whether TCP/IP is used.
The method for setting is the same as for the standard Network settings. For details, refer to TCP/IP (Enable/Disable TCP/
IP) on page 4-54.
IPv4 Setting (TCP/IP IPv4 settings)
This selects the settings for TCP/IP (IPv4). The method for setting is the same as for the standard Network settings. For
details, refer to IPv4 Setting (TCP/IP IPv4 settings) on page 4-55.
IPv6 Setting (TCP/IP IPv6 settings)
This selects the settings for TCP/IP (IPv6). The method for setting is the same as for the standard Network settings. For
details, refer to IPv6 Setting (TCP/IP IPv6 settings) on page 4-58.
Netware (NetWare setting)
NetWare is a PC-based network operating system specifically for servers. NetWare is a client-server system that operates
by installing the NetWare OS on the server and dedicated client modules (NetWare clients) on the client machines (running
MS-DOS, OS/2, Windows, etc.). The basic network layer protocol used is NetWare's own IPX (Internetwork Packet
eXchange)/SPX (Sequenced Packet eXchange), but the system also supports TCP/IP.
The feature of the NetWare OS is that it is specifically for servers, unlike general-purpose operating systems such as
Windows NT and UNIX. Only the minimum required for server operation can be performed from the NetWare OS console
on the server. Server and file management is basically carried out using management tools from the clients. Also, all drivers
and protocol stacks are in the form of modules called NetWare Loadable Modules (NLMs), and the ability of NLMs to load
and unload flexibly and dynamically is a major advantage of this system.
1 In the Basic menu, press or to select Netware.
2 Press [OK]. The Netware screen appears.
3 Press or to select whether NetWare is enabled.
4 Press [OK]. The NetWare setting is set and the Basic menu
reappears.
AppleTalk (AppleTalk setting)
AppleTalk is a communications protocol used primarily on Macintosh computers and also refers to the Mac OS network
functions.
AppleTalk assigns 24-bit network addresses (a 16-bit network section and an 8-bit node address) that are used to identify
devices (computers, printers, etc.) on the network.
When the power is turned on, a broadcast signal is sent out onto the network and the addresses and machine names are
automatically assigned. The default setting is On.
1 In the Basic menu, press or to select AppleTalk.
1
TCP/IP
2
*On
130


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triumph-Adler P-4530DN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triumph-Adler P-4530DN in the language / languages: English as an attachment in your email.

The manual is 10 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Triumph-Adler P-4530DN

Triumph-Adler P-4530DN User Manual - German - 316 pages

Triumph-Adler P-4530DN User Manual - Dutch - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info