647521
12
Zoom out
Zoom in
Previous page
1/166
Next page
1-2
Installation
Make sure there is no chance of ammonia or other organic gasses being generated in the area.
The grounded power outlet (refer to the safety instructions in the Safety section) you plan to
connect to for power should be nearby and not obstructed.
Make sure that the printer is not exposed to direct sunlight.
Avoid areas in the direct airflow of air conditioners, heaters, or ventilators and areas subject to
temperature and humidity extremes.
Choose a sturdy, level surface where the printer will not be exposed to strong vibration.
Keep the printer away from any objects that might block its heat vents.
Do not locate the printer near curtains or other combustible objects.
Choose an area where there is no possibility of the printer being splashed with water or other
liquids.
Make sure that the surrounding area is clean, dry, and free of dust.
Operational precautions
Note the following important precautions whenever using the printer:
Operating Environment
The following describes the operating environment required when using the printer:
Temperature:
10°C to 32.5°C (50°F to 95°F) with fluctuation of 10°C (18°F) per hour.
Humidity:
20% to 80% (no condensation) with fluctuation of 20% per hour.
Terminal
The following describes precautions for using the terminal.
Never switch the power to the terminal off and never open the covers while the unit is printing.
Never place flammable gasses, liquids or objects that generate magnetic forces near the terminal.
When unplugging the power cord, always grasp the plug and never pull on the cord. A damaged
cord creates the danger of fire or electrical shock.
Never touch the power cord when your hands are wet. Doing so creates the danger of electrical
shock.
Always unplug the power cord before moving the terminal. Failure to do so can damage the
power cord, creating the danger of fire or electrical shock.
Always unplug the power cord if you do not plan to use the terminal for a long time.
Never place any heavy objects on the power cord, pull on it or bend it. Doing so creates the dan-
ger of fire or electrical shock.
Always make sure the terminal is not placed on the electrical cord or the communications cables
of any other electrical equipment. Also make sure that cords and cables do not get into the termi-
nal’s mechanism. Any of these conditions create the danger of malfunction and fire.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triumph-Adler CLP 4524 MFP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triumph-Adler CLP 4524 MFP in the language / languages: English as an attachment in your email.

The manual is 4,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Triumph-Adler CLP 4524 MFP

Triumph-Adler CLP 4524 MFP User Manual - German - 170 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info