647518
138
Zoom out
Zoom in
Previous page
1/148
Next page
Computer Interface
4-10 ADVANCED OPERATION GUIDE
RS-232C Cable Connection (CLP 4524 only)
Connecting the Printer to the Computer
Make sure that both computer and printer are powered off.
1
Discharge static electricity from your body by touching a metal object such
as a doorknob.
2
Plug the end (printer side) of the RS-232C cable into the printer’s serial
interface connector and screw it on securely.
3
Plug the other end of the cable into the computer’s serial interface
connector.
4
Power on the printer.
5
The printer’s parameters are set at the factory as follows:
Baud rate = 9600 bps, data bits (character length) = 8, stop bits = 1,
parity = none
The two RS-232C protocols are XON/XOFF and DTR. The printer
executes both of these protocols simultaneously, using positive logic
for DTR.
If you are not sure about the printer’s current parameter settings, reset
them to the values shown above (i.e., baud rate = 9600 bps, etc.). You can
perform parameter settings from the operation panel. See Changing Serial
Interface Parameters (
CLP 4524 only) on page 2-30.
6
On the computer, set the same parameters as that of the printer. Most
computers allow you to do this by DIP switch settings that should be made
before power is turned on.
With Windows XP, make settings as follows:
1
Click on the Start button in the Windows XP task bar and align the cursor
with Settings, then click on Control Panel from among the items
displayed.
2
The Control Panel window opens. Double click on System.
3
System Properties window opens. Click on the Hardware tab, then click
on the Device Manager button, and double click on Ports (COM & LPT).
4
Double click on Communications Port.
5
The Communications Port Properties dialog is displayed for the
selected COM port. Click on the Port Settings tab and set the port
properties.
6
After setting the properties, click the OK button.
138


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triumph-Adler CLP 4520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triumph-Adler CLP 4520 in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Triumph-Adler CLP 4520

Triumph-Adler CLP 4520 User Manual - English - 70 pages

Triumph-Adler CLP 4520 User Manual - German - 148 pages

Triumph-Adler CLP 4520 User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info