647518
59
Zoom out
Zoom in
Previous page
1/148
Next page
Using the Operator Panel
ADVANCED OPERATION GUIDE 2-33
6
Press Z. One of the following menus is indicated. To change settings for
the item, press [OK] ([ENTER]). Use U or V to change the value or
selection.
7
Activate the appropriate protocol that is required to connect the printer to
the network. To activate a protocol, display the protocol, press [OK]
([ENTER]), press U or V to change from Off to On, and press [OK]
([ENTER]).
8
Press [MENU]. The display returns to Ready. You can print a network
status page to confirm that the IP address, subnet mask address, and the
gateway address have been properly set. To print a network status page,
see Printing a Network Interface Status Page on page 2-35.
Resolving IP Address
To connect the printer to the network using TCP/IP protocol, you must set
the IP address on the printer. The IP address must be unique to the printer
and should be obtained from your network administrator.
1
Activate TCP/IP protocol in the manner
described above.
Set this item to On when you connect to a
network using NetWare. In submenu (>),
frame mode can be selected from Auto,
802.3, Ethernet-II, and 802.2.
>NetWare >
On
Set this item to On when you connect to a
network using TCP/IP. Submenu (>) has
items including DHCP, BOOTP, IP
address, subnet mask address, and
gateway address. To resolve IP address
for the network card, see Resolving IP
Address on page 2-33.
>TCP/IP >
On
Appletalk must be activated (On) for
networking with Macintosh computers.
>Appletalk
Off
When the item is set to On, the printer
prints out a network status page when it
prints the printer status. See Printing a
Network Interface Status Page on page
2-35.
>Network Status
Page Off
>TCP/IP >
On
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triumph-Adler CLP 4520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triumph-Adler CLP 4520 in the language / languages: English as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Triumph-Adler CLP 4520

Triumph-Adler CLP 4520 User Manual - English - 70 pages

Triumph-Adler CLP 4520 User Manual - German - 148 pages

Triumph-Adler CLP 4520 User Manual - German - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info