Manual Triton TRA001 (page 7 of 72) (English, German, Dutch, French, Italian, Spanish)

664980

Zoom out

Zoom in

1/72

Functions

POWER SWITCH

When the router is connected to

power, the Switch (3) will illuminate (in

both 'on' and 'off' positions).

The Retracting Switch Cover (4)

prevents accidental starting of the

router. It must be retracted before the

router can be switched on. The cover

will remain open until the router is

switched off.

ADJUSTING DEPTH OF CUT

There are three methods of cut depth adjustment, depending on

the accuracy and control required:

• Free Plunge, for conventional and fast depth adjustment

• Winder Handle Plunge, for controlled and fast adjustment

• Micro Adjuster, for precise depth setting throughout the full

plunge range

Free Plunge

1. Free plunge depth adjustments

can be made with the Plunge

Mode Selector Button (13)

engaged. Press it deep inside

the handle until it engages

inward

2. Release the Plunge Lock Lever

(10). Push the body of the router

until the desired depth is reached. Re-lock the plunge lock

lever

NOTE: The position of the plunge lock lever can be altered by

removing its retaining screw and repositioning the lever on the

bolt. Re-tighten ﬁrmly.

Handle Winder Plunge

1. Check that the Plunge Mode

Selector Button (13) is not

engaged. If it is engaged, press

the button inward and allow it to

spring out ﬂush with the handle

2. Ensure the Plunge Lock Lever

(10) is unlocked

3. Pull the Winder Handle Clutch Ring

(14) into the handle, then turn the

handle to raise or lower the cutter

4. Release the ring at the required

depth. It will ‘pop out’ and lock the

cutter at the set depth

5. Lock the Plunge Lock Lever (10),

particularly for heavy cuts

FUNCTIONS

Micro Adjuster

For use in Winder Handle Plunge Mode only

1. Disengage the Plunge Mode

Selector Button (13), and ensure

that the Plunge Lock Lever (10) is

unlocked

NOTE: If the Micro Winder (12) is

turned with the plunge lock lever

engaged the micro winder will

start clicking and the cut depth will

remain unchanged.

2. Turn the Micro Winder (12) clockwise to increase cut depth

and anti-clockwise to reduce cut depth

NOTE: When the end of the depth

adjustment range is reached the

micro winder will offer greater

resistance to turn and will begin

to ‘click’.

3. Lock the plunge lock lever,

particularly for heavy cuts

FITTING A ROUTER BIT

WARNING: Always disconnect the tool

from the power supply before ﬁtting

or removing a router bit.

1. Turn the power switch ‘off’,

allowing the retracting switch

shutter to close. (The retracting

shutter will lock closed when the

collet lock is engaged)

2. Place the router upside down, or on its side. With the motor

completely stopped plunge the router to its maximum depth

using the free plunge or winder handle plunge mode

NOTE: Ensure the depth stop is fully retracted (see ‘Depth Stop

and Turret’). The collet should be

protruding through the base, allowing

easy spanner access.

3. Insert the Router Bit into the

collet then use the Spanner (21)

to turn the collet slightly, allowing

the collet lock to engage. Once

engaged, turn the spanner

clockwise to tighten the cutter

4. Return the router to a normal operating depth. This will

disengage the collet lock and release the retracting switch

shutter, allowing access to the power switch

330165_Z1MANPRO1(with Japanese).indd 6 21/07/2014 09:48

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Triton TRA001 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Triton TRA001 Manual

Product: