665076
8
Zoom out
Zoom in
Previous page
1/82
Next page
8
GB
Troubleshooting
Symptom Possible Cause Solution
No power
Mains plug not inserted into socket or switched on Plug in and switch on
Fuse blown in plug or circuit breaker tripped in consumer
unit
Replace fuse or reset circuit breaker
RCD connected and not reset Reset RCD
Extension lead overloaded and thermal protection has
operated
Replace extension lead or unwind cable fully from reel to
allow maximum current use and reset thermal protection
Power lead or power lead connection to tool or mains
plug damaged
Requires repair at an authorised Triton service centre
Power tool fault Requires repair at an authorised Triton service centre
Motor does not start
Carbon brushes worn Brushes need replacing by an authorised Triton service
centre
Power tool fault Requires repair at authorised Triton service centre
Rough finish on wood after planing
Worn blade or blades Replace all blades
Damaged blade or blades Replace one or more blades
Wood is wet Allow wood to dry
Depth of cut incorrect
Worn or damaged blades Replace blades
Poorly fitted blade or blades Re-fit blade or blades
Incorrect blades fitted Replace blades with correct type
Barrel not rotating
Broken drive belt Replace belt
Vibration or abnormal noise
STOP using tool immediately Re-check all user accessible parts are secure and correctly
fitted first and if not solved contact an authorised Triton
service centre
4. Check the belt runs evenly by manually turning the belt
5. Replace the Drive Belt Cover and the three fixing screws, ensuring the longer screw is
located in the hole at the front of the cover
6. Plug the machine back into the power outlet and switch the tool on and run for a minute to
make sure that the motor and belt are operating correctly
Brushes
Over time the carbon brushes inside the motor may become worn
Excessively worn brushes may cause loss of power, intermittent failure, or visible sparking
If you suspect that the brushes may be worn, have them replaced at an authorised
service centre
Disposal
Always adhere to national regulations when disposing of power tools that are no longer
functional and are not viable for repair.
Do not dispose of power tools, or other waste electrical and electronic equipment (WEEE),
with household waste
Contact your local waste disposal authority for information on the correct way to dispose of
power tools
366649_Z1MANPRO2.indd 8 06/09/2016 09:13
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triton TPL180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triton TPL180 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 7,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info