Manual Triton RSA300 (page 4 of 30) (English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish)

665085

Zoom out

Zoom in

1/30

Wear hearing protection

Wear eye protection

Wear breathing protection

Wear head protection

Wear hand protection

Read instruction manual

Caution!

Model number: RSA300

Power Switch (max voltage & current): 250V~50/60Hz 10A

Compatibility: RTA300 Precision Router Table

Standing size: 1055 x 990 x 690mm

Weight: 11.4kg

Product Familiarisation

1. Front End Panel

2. Rear End Panel

3. Side Frame (x 2)

4. Front Legs (x 2)

5. Rear Legs (x 2)

6. Hanging Hooks (x 4)

7. Round Knobs (x 4)

8. Leg Clamps (x 4)

9. Leg Clamp Springs (x 4)

10. Coach Bolts (x 4)

11. Flange Nuts (x 16)

12. Screws (x 16)

Intended Use

Metal table stand with integrated electrical switchbox, designed to hold the

Triton RTA300 Precision Router Table insert.

Before Use

Assembly

1. Fit 2 Leg Clamps (8) to each Side Frame (3) using the Coach Bolts (10), Leg

Clamp Springs (9) and Round Knobs (7 & A)

2. Ensure the Leg Clamps ﬁt into the slots on the Side Frame end brackets

before screwing on the Round Knobs, just a few turns only (B)

3. Attach the Side Frames to the Front End Panels (1) and Rear End Panels (2)

using the Phillips Head Screws (12) and Flange Nuts (11), as shown

4. Do not tighten yet. Once all fasteners are in position, place the unit on a ﬂat

work surface and tighten ﬁrmly with a screwdriver

5. Turn the unit upside down. Remove the Front Legs (4) from their storage

position inside the Rear Legs (5)

6. Insert the Rear Legs (with rubber feet) fully into their sockets at the rear of

the unit. Insert the Front Legs fully into the front sockets (C). The location of

the holes in each leg is not important at this stage. Lock them by tightening

the Round Knobs

7. Turn the router table stand right way up and test that all feet are level. If it

is on an uneven surface, make any necessary adjustments by extending

one of the legs slightly from its socket to ensure the unit is stable

Hanging Hooks

• Four Hanging Hooks (6) are supplied with the Triton Router Stand RSA300;

these snap onto the lower crossbars of the stand

• The two wide hooks can be used for storage of the router table fence - it

hangs via the scale pointer holes. These hooks should be ﬁtted to the right-

hand side of the stand (viewed from the switchbox end)

• The two narrow hooks are for storage of the pressure ﬁnger assembly,

which hangs via the ﬁnger slots. These hooks should be ﬁtted on the left

side

• The RSA300 also has a hole in the rear panel for storage of the protractor.

For a tight ﬁt, bend the tab in the top of the hole downward slightly

Speciﬁcation

Description of Symbols

The rating plate on your tool may show symbols. These represent important

information about the product or instructions on its use.

Thank you for purchasing this Triton tool. This manual contains information necessary

for safe and effective operation of this product. This product has unique features and,

even if you are familiar with similar products, it is necessary to read this manual

carefully to ensure you fully understand the instructions. Ensure all users of the tool

read and fully understand this manual.

Original Instructions

Introduction

330095_Z1MANPRO1.indd 4 03/12/2015 10:19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Triton RSA300 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 3,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Triton RSA300 Manual

Product: