Manual Triton MOF 001 (page 8 of 82) (English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish)

664979

Zoom out

Zoom in

1/82

Troubleshooting

Problem Possible cause Solution

No function when Power Switch (12) is operated No power Check power supply

Defective On/Off Power Switch Replace the Power Switch at an authorised Triton service

centre

Inaccurate cutting proﬁle Depth Stop (4) not correctly adjusted Ensure that the Depth Stop corresponds to the maximum

amount of cut permitted by the Turret Stops (1)

Incorrectly ﬁtted or loose router bit/Collet (22) Tighten router bit/Collet and cutter assembly

Router will not operate No supply of power Check that power is available at source

Brushes worn or sticking Disconnect power, open Brush Access Covers (9) and ensure

brushes are not damaged or heavily worn

Power Switch (12) is faulty Have the tool serviced by an authorised Triton service centre

Motor components faulty or short circuited Have the tool serviced by an authorised Triton service centre

Router runs or cuts slowly Blunt or damaged cutter Re-sharpen or replace cutter

Speed Controller (15) set low Increase variable speed setting

Motor is overloaded Reduce pushing force on router

Excessive vibration Incorrectly ﬁtted or loose router bit Reﬁt or tighten router bit

Bent or damaged router bit Replace router bit

Heavy sparking occurs inside motor housing Brushes not moving freely Disconnect power, remove brushes, clean or replace

Damaged or worn motor Have the tool serviced by an authorised Triton service centre

Micro Winder (10) “clicks” or not adjusting Plunge Lock Lever (16) engaged Release Plunge Lock Lever (16)

Reached end of adjustment range Reset Micro Winder (10) and set depth with the Depth

Stop (4)

Makes an unusual sound Mechanical obstruction Have the tool serviced by an authorised Triton service centre

Damage to internal windings Have the tool serviced by an authorised Triton service centre

• Never use caustic agents to clean plastic parts. If dry cleaning is not sufﬁcient, a mild

detergent on a damp cloth is recommended

• Water must never come into contact with the tool

• Ensure the tool is thoroughly dry before using it

• If available, use clean, dry, compressed air to blow through the ventilation holes (where

applicable)

Lubrication

• Slightly lubricate all moving parts at regular intervals with a suitable spray lubricant

Brushes

• Over time the carbon brushes inside the motor may become worn

• Excessively worn brushes may cause loss of power, intermittent failure, or visible sparking

• To replace the brushes, remove the two Brush Access Covers (9). Remove the worn brushes

and ensure the sockets are clean. Carefully replace with new brushes and then replace the

Brush Access Covers

• After ﬁtting run the router without load for 2-3 minutes to help the brushes bed in. The

process of the brushes fully bedding in may take repeated uses. Motor sparking may

continue until new carbon brushes have bedded in

• Alternatively, have the machine serviced at an authorised service centre

Storage

• Store this tool carefully in a secure, dry place out of the reach of children

Disposal

Always adhere to national regulations when disposing of power tools that are no longer

functional and are not viable for repair.

• Do not dispose of power tools, or other waste electrical and electronic equipment (WEEE),

with household waste

• Contact your local waste disposal authority for information on the correct way to dispose of

power tools

330085_Z1MANPRO1.indd 8 05/01/2017 15:35

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Triton MOF 001 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Portuguese, Spanish as an attachment in your email.

The manual is 6,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Triton MOF 001 Manual

Product: