Manual Tristar sz 2187 (page 6 of 41) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

320930

Zoom out

Zoom in

1/41

Operation and maintenance

Remove all packaging of the device.

Check if the voltage of the appliance corresponds to the main voltage of your home.

Rated voltage : AC220-240V 50Hz

This vacuum is not designed to collect liquids and sharp. Never vacuum hot ashes, make sure

it is fully cooled.

First use

Place the vacuum foot (No 15) on the telescope tube (nr.7). The telescope tube length can be

made, according to your wishes, by the pressing button (nr.6) down and push the tube to

extend or reduce. Place the tube (Nr.10) with the side of the hose coupling (nr.5) in front of the

vacuum, if you hear a click, this just confirmed. To disconnect the hose press the button of the

hose coupling.

Using the button on the vacuum foot in the desired position, with or without a brush on the

bottom of the suction foot.

With the air regulator (nr.8) controls the suction if it should be

temporarily reduced.

Use

Pull the plug from the vacuum cleaner and place it into a wall outlet. Press the ON / OFF

button and start your vacuum cleaner line to the suction button (nr.2) the desired suction.

With the air regulator (nr.8) controls the suction if it should be temporarily reduced.

To turn the unit off, press the ON / OFF button. Unplug the power cord and press the button

cable rewind (nr.3). You can use the storage clip (nr.14) to store the vacuum bar when you

store the vacuum cleaner.

Cleaning of the device

You need to empty the dust container when the dust full indicator light (No 4) lights.

Do this immediately otherwise it loses much suction device.

Press the button of the dust collector as

Figure B and remove it from the device.

Hold the container over a dust bin

and press the button at the bottom of the dust

collector. See Figure C.

Close the lid and place the dust collector

back into the device until you hear a click.

To ensure the best suction of the vacuum cleaner you have to cleanthe HEPA filter (Nr.12)

regular. Remove the dust container from the device (Figure B). Turn the lid counter-clockwise

independently, see Figure D.

Remove the HEPA filter 12 from the dust container by turn the dust container back cover

anticlockwise. see Figure E. Clean the filter and the various parts with lukewarm water. These

parts are not dishwasher safe.

Make the good parts dry, let the filter dry completely before you put it back.

Remove the cover on the back of the device and remove the filter, see Figure E1.

Clean the filter and cover with lukewarm water, allow the parts to dry completely before you put

it back. The vacuum cleaner and the other parts you can use a damp cloth to decline.

Never use the vacuum with a wet filter! This may cause an electric shock and

the unit may malfunction.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tristar sz 2187 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tristar sz 2187 Manual

Product: